6.3Security
You can set the monitor to be accessed only via a password.
1.. Press to open the Setup screen.
2.. Select Security. Selecting Security will always display the following password prompt. Enter the current password. The initial password is 0000. This is working only from 1004.17.
3.. Set Functions Lock to On.
6.3 Security
4.. Because the initial password of most devices with a security function is set to 0000, it is best to change the password. Enter a new password in the Change PIN field.
5.. If you forget your password, perform Reset Settings. The password will be reset to 0000. Refer to the following section for details about Reset Settings.
◀ 52 ▶