3.Changing the Projector Settings
•
Sharpness
Adjust the sharpness of the image.
The greater the value, the sharper the image. Default: 0
•
Noise Reduction
Select whether or not to use the function to reduce the Y/Pb/Pr (480i/576i) or video signal noise. This function is available when you select [Y/Pb/Pr] (480i/576i) or [Video] as an input signal. Default: [Off]
•On
•Off
Adjust the level of red in the image.
The greater the value, the stronger the color red is in the image. Default: 0
•
Adjust the level of green in the image.
The greater the value, the stronger the color green is in the image.
Default: 0
•
Adjust the level of blue in the image.
The greater the value, the stronger the color blue is in the image. Default: 0
•
RGB Input Range
Select the RGB input range.
When connecting an AV equipment which outputs a
This function is available when you select [HDMI] (RGB signals) as an input signal. Default: [Full]
54