4. Troubleshooting
This chapter explains the basic problems and troubleshooting methods when an indicator light is lit.
Indicator Display List
The projector uses the [Power] button, indicators, and beeps to notify you if a malfunction occurs. Check the indicator's status, and implement the following measures.
Indicator display image
The [Power] button is located on top of the projector. The indicators are on the front of the projector. For details, see p.12 "Projector Parts and Their Functions".
1 2 3
|
| CLA036 |
|
1. | [Power] button |
|
|
2. | Lamp indicator |
|
|
3. | Temp indicator |
|
|
|
|
|
|
| Status | Causes | Solutions |
|
|
| |
The projector does not turn | The projector is malfunctioning. | Disconnect the power cord, and | |
on. |
|
| contact your service representative. |
"Hardware Error" was | The projector has an internal | Disconnect the power cord, wait a | ||
displayed, and the projector | malfunction. | while, and then turn on the | ||
turned off during operation. |
| projector again. | ||
|
|
|
| If the problem cannot be resolved, |
|
|
|
| contact your service representative. |
|
|
|
| |
|
|
|
| |
65