Ricoh PJ WX4130 operating instructions Changing the Projector Settings

3. Changing the Projector Settings

High Altitude Mode

Select whether or not to increase the speed of the fan.

The number of fan rotations is high when set to [On]. Select [On] only when using the projector at an altitude of more than 1,500 meters (4,921 feet). Do not select [On] when the altitude is less than 1,500 meters (4,921 feet).

Default: [Off]

•On

•Off

Key Lock

Select whether or not to lock the buttons on the control panel.

You can change this setting to [Off] by pressing the [AV Mute] button on the projector's control panel for 10 seconds.

Default: [Off]

•On

•Off

Reset All

Reset all menus to their defaults.

This function cannot restore the default settings of [User Logo] in [Display Settings] and [Password] in [Default Settings].

Password

Register a password for the projector.

•Register Password

Enter a 6-digit password.

The current password is required to change the password. Default: [000000]

•Password Protect

Select whether or not to enter a password when the projector is turned on. If this is selected, a password must be entered when the projector is turned on after the power cord has been unplugged. However, a password is not required when turning the projector on from the standby mode.

A password is required to change this setting. Default: [Off]

•On

•Off

62