Samsung SP-L335, SP-L355, SP-L305 specifications Lamp Replacement Procedure, Model

Page 17

2-6 Lamp Replacement

Cautions on Lamp Replacement

•The projector lamp is an expendable item. For best operating performance, replace the lamp according to the usage time. You can view the lamp usage time in the Information Display ([INFO] button).

•Use the recommended lamp when replacing. Replace the lamp with the one specified below.

MODEL	L255	L305	L335	L355

Lamp Model Name	230W UHP		220W UHP E19.5
	NSHA230SS		220W UHP E19.5
	NSHA230SS

Lamp Manufacturer	Ushio		Philips

- For inquiries on lamp purchase, please see 'Contact SAMSUNG WORLDWIDE' in section 6-3.

•Check that the power cord is unplugged before replacing the lamp.

•Because the lamp is a high temperature and high voltage product, wait at least one hour from the time you disconnect the power cord before replacing the lamp.

•The lamp is located on the left side of the projector (when looking from the front).

•Do not leave the old lamp near inflammables or in reach of children. There is a danger of fire, burns, or injury.

•Remove dirt or foreign material around or inside the lamp unit using a proper vacuum device.

•When handling the lamp, avoid touching any part of it except for the handles. If you handle the lamp incorrectly, you can shorten the lamp’s lifetime and affect picture quality.

•When you turn the projector over to change the lamp, put the projector on a soft cloth on a flat surface.

•The projector has been designed so that the projector does not work if the lamp cover is not completely assembled after a lamp replacement. If the projector does not work properly, please check the operating status of the indicator LED.

Lamp contains Mercury. Dispose According to Local, State or Federal Laws.

Lamp Replacement Procedure

Because the lamp is a high temperature and high voltage product, wait at least one hour from the time that the power cord is disconnected before replacing it.

The lamp is located on the left side of the projector (when looking from the front).

1.Remove the screw shown in the figure below, and then open the cover.

2.Remove the two (2) screws shown in the figure below.

2-6	Installation and Connection

Image 17

Contents LCD Projector Table Of Contents More Information Before You Start Using this ManualIcons used in this manual Copyright NoticeCleaning Inside the Projector Care and MaintenanceCleaning the Surface and the Lens Icons used for safety precautions Safety PrecautionsPower Related Meaning of SignsInstallation Related Usage Related Major Safety Precautions Page Package Contents Installation and ConnectionInstalling the Projector Leveling with Adjustable Feet Zoom and Focus Adjustment 22.9 Screen Size and Projection Distance548.6 Model Lamp ReplacementLamp Replacement Procedure Replacing and Cleaning the Filter Ventilation openings Rear Side You do not have to change the Color quality setup Setting up the PC EnvironmentInstallation and Connection PC Timing D-Sub/HDMI Supported Display ModesAV Timing Hdmi Format Resolution ScanAV Timing D-Sub NTSC, Ntsc 4.43, PAL, PAL60, PAL-N, PAL-M, Secam AV Timing VIDEO/S-VIDEOConnecting the Power Connecting with a PC Connecting a PC using an HDMI/DVI cable Connecting an External Monitor Connecting an HDMI-Compatible Device Connecting an AV device using a D-Sub cable Connecting an AV device with component output Connecting using a Video/S-Video cable Connecting an External Speaker Connecting to a Dynamic IP Dhcp Network Connecting to a NetworkTo use the network function, Network must be set to On Connecting to a Static IP NetworkLocking the product Kensington LockProduct Features UsingName Description Indicators Stand by Blue LED Lamp Blue LED Temp Red LEDFront, Upper Remote Control Install Button Mode ButtonSize Button Keystone buttonInstalling Batteries in the Remote Control Stand by Lamp Temp Status LED IndicationsLED Indications Classifica State Measures Tion Clearing Indicator ProblemsInput Using the Screen Adjustment Menu OSD On Screen DisplayPicture Menu SUB-MENUAdjusted Overscan is not supported in AV and S-Video modes Setup Usage Option Activated only in Media Play ModeFilter, and if necessary, clean or replace it Network Management Management using the Web BrowserProjector Management using PC Software Using Icons Status State Action Temperature status Using Page Using Precautions for using a USB storage device Connecting a USB Storage Device and PrecautionsConnecting a USB Device Media Play Function Documents Menu displayed when you are viewing a documentMenu displayed from the Documents screen Menu Item DescriptionEncoding RotatePhoto Play ModeMenu displayed from the Photo Thumbnails screen SlideshowBackground Music Slideshow SettingAspect Ratio Play Music MusicMenu displayed from the Music List screen Play Movie MovieMenu displayed from the Movie List screen Subtitle Setting Menu displayed when playing a movieUpdate/Reset SettingsFirmware Update To upgrade software Before Software UpgradeFile Extension Supported File FormatsSupported File Formats Before Requesting Service Source ScreenExternal Check whether the correct network card in the PC has been NetworkFunction Media PlayMore Information SpecificationsMore Information Serial Communication Protocol RS-232C Command TableCommunication Format Complies with the RS232C Standard Control Item CMD1 CMD2 CMD3 Value Command TableIRE/NOR Left Control Item CMD1 CMD2 CMD3 Value Control Item CMD1 CMD2 CMD3 Value ไทย Sound North America Contact Samsung WorldwideLatin America EuropeAsia Pacific CISMiddle East & Africa Correct disposal of batteries in this product Europe only Correct Disposal Europe only