Samsung SP-D400 manual Connecting to VCR/Camcorder

Page 22

Component Ports are marked as (Y/PB/PR), (Y, B-Y, R-Y) or (Y, Cb, Cr) depending on the manufacturer.

Connecting to VCR/Camcorder

Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable.

-If the video equipment has S-VIDEO OUT port, connect it to [S-VIDEO IN] input port of the projector. Using the S-VIDEO connection, provides a higher visual quality.

When finishing connecting the devices, connect the power of the projector and the VCR.

Using the Projector

Turn on the projector and press the [Video] button to select <Video>. or

Press the [S-VIDEO] button to select S-Video.

Check that the projector and the video equipment are turned off before connecting cables.

This projector does not support sound. (Separate audio system is needed for sound.)

Connecting to PC

Image 22

Contents Page Under no circumstances touch the power plug with wet hands Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Do not plug multiple devices into a single wall outletUnplug the power plug before cleaning the product Keep the power cord away from heatersDo not drop the product while carrying it Place the product on the ground carefullyKeep the product out of children’s reach Do not disassemble, or attempt to fix or modify the product If swallowed, see a doctor immediatelyMake sure to place your remote control on a table or desk Take care not to lose the lens cover of the productPage Optical engine with advanced DLP technology Indicators ClassificationState RS-232C port For service input terminals Remote Control Signal Receiver Power Input port Size Supported Display Modes Supported Resolution/Size Modes Picture Position Modes Select Menu Setup Install Rear-Floor Screen size Horizental Vertical Max Screen Rear of Projector Using the Projector Connecting to VCR/Camcorder Connecting Video Devices Monitor, TV, etc Hdmi Screen Description Normal Only activated in the PC environment Blue Black Screen Adjustment Symptoms Page Clean the projector using a soft dry cloth Lamp ReplacementLamp Replacement Procedure Latin AmericaEurope CIS Antenna in Port Color TemperatureAnalog Broadcast Black LevelDVD Digital Versatile Disc Gamma ModeRS-232C Port Service Input Port DLP Digital Light Processing