Samsung SP-D400 manual Unplug the power plug before cleaning the product

Page 3

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

zThere is a danger of electric shock or fire.

Always unplug the unit by holding the power plug. Pulling the power cable may damage the inside of it.

zThere is a danger of fire.

Unplug the power plug before cleaning the product.

zThere is a danger of electric shock or fire.

Power Related Installation Related Cleaning and Use Related

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

zThere is a danger of fire.

When installing the product in a cabinet or on a shelf, make sure the front end of the base does not protrude.

zDropping the product may damage it or cause injury.

Keep the power cord away from heaters.

zThe coating of the power cord may melt and cause electric shock or fire.

Do not install the product in locations exposed to oil, smoke, moisture or water (rainwater), or in a vehicle.

zThere is a danger of electric shock or fire.

Do not install the product in locations with poor ventilation such as a bookshelf, closet, etc.

zAn increase in the internal temperature may cause a fire.

Image 3
Contents Page Do not plug multiple devices into a single wall outlet Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Under no circumstances touch the power plug with wet handsKeep the power cord away from heaters Unplug the power plug before cleaning the productPlace the product on the ground carefully Do not drop the product while carrying itKeep the product out of children’s reach If swallowed, see a doctor immediately Do not disassemble, or attempt to fix or modify the productTake care not to lose the lens cover of the product Make sure to place your remote control on a table or deskPage Optical engine with advanced DLP technology Indicators ClassificationState RS-232C port For service input terminals Remote Control Signal Receiver Power Input port Size Supported Display Modes Supported Resolution/Size Modes Picture Position Modes Select Menu Setup Install Rear-Floor Screen size Horizental Vertical Max Screen Rear of Projector Using the Projector Connecting to VCR/Camcorder Connecting Video Devices Monitor, TV, etc Hdmi Screen Description Normal Only activated in the PC environment Blue Black Screen Adjustment Symptoms Page Lamp Replacement Clean the projector using a soft dry clothLatin America Lamp Replacement ProcedureEurope CIS Black Level Color TemperatureAnalog Broadcast Antenna in PortDLP Digital Light Processing Gamma ModeRS-232C Port Service Input Port DVD Digital Versatile Disc