Samsung SP-D400 manual Connecting Video Devices Monitor, TV, etc

Page 23

Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.

When connections are all completed, connect both power cords of the projector and the PC.

This product supports plug and play, therefore you do not need to install a driver on your PC.

Using the Projector

Turn on the projector and press the [PC] button to select <PC>.

If PC Mode is not available, check PC video cable is in place.

Turn on the PC and set the PC Environment when necessary.

Adjust the screen.(Auto Adjustment)

Sound comes out from PC speakers.

Connecting Video Devices (Monitor, TV, etc.)

- When using the D-sub (analog) output through another video device (monitor, TV, etc.).

Connect the PC OUT terminal of the projector and the D-sub terminal of the video device using a D-sub cable.

After connecting them, turn on your projector and the video device (monitor, TV, etc.).

The PC OUT function only operates when the projector is connected to an external device through the [PC IN]

input terminal.

Image 23

Contents Page Do not plug multiple devices into a single wall outlet Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Under no circumstances touch the power plug with wet handsKeep the power cord away from heaters Unplug the power plug before cleaning the productKeep the product out of children’s reach Place the product on the ground carefullyDo not drop the product while carrying it If swallowed, see a doctor immediately Do not disassemble, or attempt to fix or modify the productTake care not to lose the lens cover of the product Make sure to place your remote control on a table or deskPage Optical engine with advanced DLP technology Indicators ClassificationState RS-232C port For service input terminals Remote Control Signal Receiver Power Input port Size Supported Display Modes Supported Resolution/Size Modes Picture Position Modes Select Menu Setup Install Rear-Floor Screen size Horizental Vertical Max Screen Rear of Projector Using the Projector Connecting to VCR/Camcorder Connecting Video Devices Monitor, TV, etc Hdmi Screen Description Normal Only activated in the PC environment Blue Black Screen Adjustment Symptoms Page Lamp Replacement Clean the projector using a soft dry clothLatin America Lamp Replacement ProcedureEurope CIS Black Level Color TemperatureAnalog Broadcast Antenna in PortDLP Digital Light Processing Gamma ModeRS-232C Port Service Input Port DVD Digital Versatile Disc