Samsung SNS-100/400 manual Power Input, Connecting to Monitor, „ DC Power, „ DC Only

SNS-100/400 Network Server

Ch3. Installation and Setting

3.1. Power Input

„DC Power

Only DC12V power may be supplied to this product.

When using an adapter different from the one supplied by us (DC12V/4A), make sure that it is DC12V/2A or higher.

„DC Only

For SNS-400, the recommended adapter specs are DC12V/2A, therefore, only use standard adapters.

Chart 3-1 When the copper wire’s resistance is [20℃(68℉)]

Copper Wire Size (AWG)	#24(0.22㎟)	#22(0.33㎟)	#20(0.52㎟)	#18(0.83㎟)
Resistance (Ω/m)	0.078	0.050	0.030	0.018
DROP Voltage(V/m)	0.028	0.018	0.011	0.06

yAs seen in Chart 3-1, a voltage drop occurs and thus, in the case that the adapter output wire’s length is excessively connected to the network, a problem can occur with the network server.

※Server Operation Voltage: DC 12V±10%

※Depending on the type and manufacturer of the voltage load wire described in the above chart, there may be a deviation.

3.2. Connecting to Monitor

Connect the video output terminal on the back of the product to the monitor input terminal.

SNS-100 Network Server Monitor

yConnection methods may differ depending on the used monitor and peripheral devices, so please refer to the users’ manual.

yAlways connect after turning the device’s power off.

12