Samsung SNS-100/400 manual Motion Detection, RS485/422 Setup Description, Swing Setup Description

SNS-100/400 Network Server

◊RS485/422 Setup

Item		Description
Baud Rate		Set the data transmission speed per second
Data Bit		Set the data transmission bit
Parity Bit		Select error-check method when data is displayed
Stop Bit		Set insert bit when data transmission is completed
Note	When RS-485/422 setup configuration is incorrect, the PTZ camera motion may not work. See the users’
	manual for the connected camera and carefully configure it accordingly.
◊ Swing Setup
Item		Description
First Preset / Second Preset		Designate the two presets to be used in swing mode
Mode		Select movement method between the two points((Pan/Tilt Swing)
Speed		Set movement speed
Duration		Sets the stop time at one preset point
◊ Group Setup
Item		Description
Group No.		Sets the desired group number
Preset No.		Sets each point’s preset number
Travel Speed		Sets the travel speed between each point interval
Dwell Time		Sets the stop time at each position

4.2.7. Motion Detection

This sets up motion detection function of the network server.

◊Motion Detection Configuration

Item	Description
Channel Set	Used when selecting the channel. (Applied only to 4 channel servers.)
Grid Display	Basic grid, used to choose area on the screen, is displayed or hidden.
Select Area	When selecting motion detection area, click <Select All> button to select all areas, or click <Deselect> button
	to cancel the selected area.
MD Enable	Decide whether you use motion detection function.
MD Sensitivity	Setting up sensitivity to detect motion to adjust input video by situation. You can select 1-5, and 5 is the
	highest.

26