Samsung SNS-100/400 Introduction, Features € Monitoring Screen, € Screen Text Display Functions

Page 9

1.1. Introduction

Ch1. SNS-100/400 Network Server Overview

1.1. Introduction

The SNS-100/400 is a high-tech network server that uses MPEG-4 codec technology to allow high compression rates and clear picture quality by allowing for high frame rates to be transmitted through the network.

By using the network, remote connection, monitoring, and control is possible from any location for simple use; additionally, set-up requires only a network.

The SNS-100/400 network server utilizes embedded software solutions (Embedded Web Server, Embedded Streaming Server, Network Protocol) developed by SamsungTechwin, and guarantees performance and safety while offering various solutions through Internet integration.

1.2. Features

€Monitoring Screen

It sends real-time 120fps MPEG-4 data and shows single and partitioned screens (partition screen available only for SNS-400).

The monitor output supports 1 composite unit.

€Screen Text Display Functions

Using the texts displayed on the monitor screen, the camera functions can be adjusted.

€Motion Detection

Even without an external motion sensor, this product detects motion and sends a signal. Therefore, by connecting to the alarm device, monitoring can be performed much more efficiently.

€Alarm and interoperation

Motion Detection function is interoperated with Alarm, pictures can be transmitted via e-mail or FTP.

€USB Recording/Search

When a USB memory device is attached to the server, events can be recorded and the recorded events can be searched directly from the webpage.

€High Data Compression Rate

The high data compression rate based on the MPEG-4 allows high speed transmission and even from the same network bandwidth, it can send relatively more frames.

€Bi-directional audio and video transmission

Video and bi-directional audio can be transmitted in real time and recording and playing are possible through the network manager installed on user’s PC.

€Additional Functions

- NTSC/PAL auto detect and PTZ control is available.

7

Image 9
Contents Expansion Page Preface Contents Ch5 SNS-100/400 Network Server Before Setup Product Warranty and LimitationsDuring Use Disassembly and Cleaning€ Alarm and interoperation Features € Monitoring ScreenIntroduction € Screen Text Display FunctionsFront Ch2. Product Description⑥ Wall Bracket Connection BottomBack Items Specifications Recommended PC specificationsConnecting to Monitor Power Input„ DC Power „ DC Only„ RS-485/422 according to Term Switch connection Connecting to External Control Terminal„ RS-485/422 Connection „ RS-485/RS-422 Connection„ RS-232C/SENSOR in Connection „ Relay OUT ConnectionInput 3, 4 Input Network Configuration and Connection Method Configuration/connection using WebNormal Close Common Normal Open ① LAN / xDSL/ Dhcp Configuration Description ② Port ConfigurationHow to Use Web Viewer LoginWeb Viewer Screen Flip Image „ ControlsStretch Image Save ImageInstruction for Camera OSD control button ↑, ↓ button Camera Setup←, → button Set buttonUsing Administration Initialization Screen after ConnectingPTZ Control Video/Audio Setup LiveBasic Port/DDNS Configuration Network ConfigurationNetwork Product InformationUser ※ Setup User AuthorityPan / Tilt / Zoom Setup PTZ Camera Configuration DescriptionPan / Tilt / Zoom Swing Setup Description RS485/422 Setup DescriptionGroup Setup Description Motion Detection Configuration DescriptionAlarm/Sensor Setup Alarm/SensorFTP / E-mail Setup FTP Setup DescriptionMail Setup Description RecordRecord Time Setup TimeCurrent Time Upgrade System Upgrade ConfigurationLOG Factory Mode Setup System RebootBefore Calling for Malfunctions FTP Problem Solution Image transferred toSpecifications SNS-400 SNS-100 SpecificationsPage No. Z6806082501B