Samsung RIF-BT10 user manual Execute BluetoothConfigV2.x.exe

Page 11

Attachment 4. Bluetooth slave setting

1.Connect the Bluetooth main (Master/Slave) to the USB (or Serial) port on the PC.

2.Execute “BluetoothConfig_V2.x.exe”

3.Select the port

a)USB port: Select the virtual port (COM x) of step 2).

b)Serial (RS-232C): Select the COM x connected.

4.Select the same port as you chosen at Virtual COM and click “Configure Adapter”.

5.Set as below and apply OK. (slave, 19200, hardware)

6.Disconnect the Bluetooth main (Master/Slave) from the PC, assemble it with the Cover_BT, and connect it to the printer.

V1.00

WWW.SAMSUNGMINIPRINTERS.COM

11

Image 11

Contents Table of Contents SRP 350 V3.0.5E above SRP 270 V3.0.3E above RIF-BT10 RIF-BT10C CableUSBBTCableSerialBTRIF-BTM10 System structure Refer to Attachment 2. Virtual serial port setting Refer to Attachment 5. Bluetooth master Setting Connect Bluetooth Master to USB port of PC Attachment 2. Virtual serial port setting V1.00 19200 19200 OffSet as below and apply OK. slave, 19200, hardware Execute BluetoothConfigV2.x.exeAttachment 5. Bluetooth master setting Select Register Printers V1.00 Below terms explains each item reading at Configure adapter V1.00 V1.00