Samsung RIF-BT10 user manual Attachment 5. Bluetooth master setting

Page 12

Attachment 5. Bluetooth master setting

1.Connect the Bluetooth main (Master/Slave) to the USB (or Serial) port on the PC.

2.Execute “BluetoothConfig_V2.x.exe”

3.Select the port

a)USB port: Select the virtual port (COM x) of step 2).

b)Serial (RS-232C): Select the COM x connected.

4.Select the same port as you chosen at Virtual COM and click “Configure Adapter”.

5.Set as below and apply OK. (master, 19200, hardware)

V1.00

WWW.SAMSUNGMINIPRINTERS.COM

12

Image 12

Contents Table of Contents RIF-BT10 RIF-BT10C CableUSBBTCableSerialBT SRP 350 V3.0.5E above SRP 270 V3.0.3E aboveRIF-BTM10 System structure Refer to Attachment 2. Virtual serial port setting Refer to Attachment 5. Bluetooth master Setting Connect Bluetooth Master to USB port of PC Attachment 2. Virtual serial port setting V1.00 19200 Off 19200Execute BluetoothConfigV2.x.exe Set as below and apply OK. slave, 19200, hardwareAttachment 5. Bluetooth master setting Select Register Printers V1.00 Below terms explains each item reading at Configure adapter V1.00 V1.00