Troubleshooting
4-4-3 Not function of the gear of the fuser due to melting away
• Description | The motor breaks away from its place due to gear melting away. |
|
|
|
|
| Check and Cause | Solution |
|
|
|
DCU Mode : Check if the Error States '60' '62' '68' occur1. Replace the Fuser.
Check the operation of Fuser Erasing Lamp On/Off with (Service Parts : Figure
2. Replace the Main Control board. (Service Parts : Figure 9, Chapter 5)
4-4-4 Paper Empty
• Description | The paper lamp on the operator panel is on even when paper is loaded in the cassette. | ||
|
|
|
|
| Check and Cause |
| Solution |
|
|
| |
1. Bending or deformation of the actuator of the paper sen- | 1. | Replace the defective actuator. | |
sor. |
|
| (Service Parts : Figure |
2. The function of the sensor board is defective Perform | 2. | Replace the sensor board. | |
DCU mode: Perform DCU diagnostic code 8. |
| (Service Parts : Figure | |
|
|
|
|
4-4-5 Paper Empty without indication
• Description | The paper lamp on the operator panel does not come on when the paper cassette is empty. | ||
|
|
|
|
| Check and Cause |
| Solution |
|
|
| |
1. Bending or deformation of the actuator of the paper sen- | 1. | Replace the defective actuator. | |
sor. |
|
| (Service Parts : Figure |
2. The function of the sensor board is defective Perform. | 2. | Replace the sensor board. | |
DCU mode : Perform DCU diagnostic code 8. |
| (Service Parts : Figure | |
|
|
|
|
|
|
|
|
Samsung Electronics |