Samsung ML-1210, ML-1200 specifications Fault Signs Cause & Check Solution Ghost & Image

Page 37

Troubleshooting

Fault

Signs

Cause & Check

Solution

 

 

 

 

Ghost & Image

• The printed image

1. The printed image is too light

1. All of 1, 2, 3 above

Contamination

is too light or dark,

or dark, or partially contami-

(1)Remove toner and foreign sub-

 

or partially contami-

nated black.

stances adhered to the contact

 

nated black.

(1)Check whether foreign sub-

point of the developer.

 

 

stance or toner are stuck to

(2)The contact point of the unit

 

• Totally contaminat-

the terminal(point of contact)

facing that of the developer

 

edblack.

of the developer.

also must be cleaned.

 

(Black image print-

(2)Check whether the terminal

(3)If the terminal assembly is

 

ed out)

assembly is normal.

unsafe:

 

 

 

• Fully stick the terminal to or

 

• The density of print-

 

reassemble it after disassem-

 

outs is too dark and

 

bling.

 

ghost occurs.

 

• Disassemble the side plate and

 

 

 

push the terminal to be stuck,

 

 

 

then reassemble it.

 

 

2. Totally contaminated black.

2. In case of 2

 

 

(Black image printed out)

It is a phenomenon when the

 

 

(1)Check whether foreign sub-

OPC drum of the developer is not

 

 

stances are stuck to the ter-

electrically charged. Clean the

 

 

minal(point of contact) of the

terminals of the charged roller,

 

 

developer and the state of

then recheck it.

 

 

assembly.

 

 

 

(Especially check the

 

 

 

charged roller terminal.)

 

 

 

3. The printed image is dark and

3. In case of 3

 

 

ghost occurs.

It is a phenomenon as the devel-

 

 

(1)Check foreign substance

oping bias voltage of the devel-

 

 

attached to the terminal

oper. Clean the terminals of the

 

 

(point of contact) of the

developing roller, then recheck it.

 

 

developer and the state of

 

 

 

assembly.

 

 

 

(Especially check the devel-

 

 

 

oping roller terminal.)

 

 

 

 

 

4-24

Samsung Electronics

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Laser Printer Version no This manual is stated and provided for service description Precautions on Disassembly and Reassembly Safety PrecautionsSafety Precautions Replacing PrecautionsElectronic Scale Tools for TroubleshootingController ML-1210 ML-1220M ML-1250 EnginePaper TonerFront Cover Cover AssemblyOther Covers LSULaser Scanning Unit LED Panel PBATransfer Roller Motor AssemblyHvps Board Fuser AssemblyThermostat and Halogen Lamp Smps Board Main Board and Sensor Board Cause and solution of Bad image How to use DCUCause and solution of the bad discharge Cause and solution of the malfunctionDCU Setup How to use DCUCode Self Diagnostic Mode Paper Path Layout Self Test ButtonPTL Test Fan TestCheck and Cause Solution Cause and solution of Bad imageVertical Black Line and Band Vertical White LineBlack/White Spot Horizontal Black BandDark Image or a Black Light ImageBackground Uneven DensityGhost Terminal of the supply roller Satins on the FaceDescription Digital Printer Blank Page Print out Satins on BackWrong Print Position Cause and solution of the bad discharge2 JAM 4 JAM 3 JAMPaper rolled in the fuser Multi-Feeding7 OPC All LEDs blinking Fuser Error Cause and solution of the malfunctionAll LEDs blinking Scan Error Paper Empty Not function of the gear of the fuser due to melting awayPaper Empty without indication Cover Open No lamp on when the cover is openDefective motor operation No PowerVertical Line Getting Curved Precautions on Safe-keeping of Toner Cartridge Toner Cartridge ServiceService for the Life of Toner Cartridge Signs and Measures at Poor toner cartridge Fault Signs Cause & Check Solution Light imagePartially blank ImageRecycled product Fault Signs Cause & Check Solution White Black spotFault Signs Cause & Check Solution Ghost & Image Printer is not working Cause and solutions of bad environment of the softwareUtilities program Abnormal Printing How to delete the data in the spool manager Spool ErrorExploded Views and Parts List Service Parts List Exploded Views and Parts ListExploded Views and Parts List No Description Front AssemblyEngine/Frame Lower Assembly 15-2 15-1 14-2 Shield Engine Unit Assembly Plate-Upper Unit Assembly RX Drive AssemblyBlock DiagramGDI Block DiagramPanel Block DiagramPCLConnection DiagramGDI Connection DiagramLSU Connection DiagramPCLRepair Manual Diagram 1250 GDI Connection DiagramML-1210/ML-1220M Connection DiagramPCL PCL Connection DiagramML-1250Schematic Diagrams Main Circuit Diagram 2/5 Main Circuit Diagram 3/5 Main Circuit Diagram 4/5 Main Circuit Diagram 5/5 PC L Main Circuit Diagram 1/9 PCL Main Circuit Diagram 2/9 PCL Main Circuit Diagram 3/9 PCL Main Circuit Diagram 4/9 PCL MainCircuit Diagram 5/9 PCL Main Circuit Diagram 6/9 PCL Main Circuit Diagram 7/9 PCL Main Circuit Diagram 8/9 PCL Main Circuit Diagram 9/9 Hvps Circuit Diagram 1/2 Hvps Circuit Diagram 2/2 Smps Circuit Diagram No Marking Resistor 1/4W-J 5% Panel Circuit Diagram Page Samsung Electronics Digital Printing CS Group Contents
Related manuals
Manual 65 pages 11.71 Kb

ML-1200, ML-1210 specifications

The Samsung ML-1200 is a noteworthy monochrome laser printer designed to deliver impressively sharp and high-quality printouts, making it a popular choice for both home and small office environments. While it boasts a compact design, the ML-1200 does not compromise on performance, offering a variety of features that enhance productivity and ease of use.

One of the most defining characteristics of the ML-1200 is its print speed. Capable of producing up to 12 pages per minute (ppm), it ensures that users can handle their printing tasks quickly and efficiently. The first page out time is a mere 8.5 seconds, allowing users to receive their documents promptly without unnecessary delays.

Resolution is another critical factor in print quality, and the ML-1200 does not disappoint. With a printing resolution of up to 1200 x 1200 dots per inch (dpi), this printer provides crisp text and detailed graphics, making it suitable for various documents ranging from simple text files to more intricate reports and presentations.

Equipped with Samsung's unique ReCP (Rendering Engine for Clean Page) technology, the ML-1200 enhances the clarity of printed text and images. This technology works by improving edge detail and overall print quality, minimizing the chances of blurry or unclear outputs, which is a common issue with lower-tier models.

In terms of connectivity, the Samsung ML-1200 features standard USB 2.0 support, allowing users to connect the printer directly to their computer seamlessly. While it may lack wireless capabilities, this direct connection provides a stable and reliable interface for personal use.

The device offers a standard paper tray capacity of 150 sheets, along with a one-sheet manual feed slot, catering to different media types. The printer supports various paper sizes, including A4, Letter, and Legal, further enhancing its versatility for various printing tasks.

In conclusion, the Samsung ML-1200 is a robust monochrome laser printer that offers a combination of speed, print quality, and usability, making it an ideal choice for individuals and small businesses looking for a reliable printing solution. Its compact size and efficient technologies ensure that it can easily fit into any workspace while delivering outstanding results consistently.
Top Page Image Contents