Troubleshooting
4-4-6 Cover Open
• Description | The ERROR lamp is on even when the print cover is closed. | ||
| Check and Cause |
| Solution |
1. The hook lever in the top cover may be defective. | 1. | Replace the hook lever, if defective. | |
|
|
| (Service Parts : Figure 1, chapter 5) |
2. Check the connector and circuit of the cover switch | 2. | Check the insertion of the Cover Open Sensor | |
department in the Main Control board. Perform DCU |
| Connect. | |
mode : If Error state '64' occurs, Check the related codes |
|
| |
of the Cover Open Error. |
|
| |
|
| 3. | Replace the Main Control board or Cover Open |
|
|
| Sensor. |
|
|
| (Service Parts : Figure 9, chapter 5) |
Hook Lever
4-4-7 No lamp on when the cover is open
• Description | The ERROR lamp does not come on even when the printer cover is open | ||
|
|
|
|
| Check and Cause |
| Solution |
|
|
| |
1. Check the connector(CN8) and circuit of the cover switch | 1. | Check the insertion of the Cover Open Sensor | |
department in the Main Control board. Perform DCU |
| Connect. | |
mode : If Error state '64' occurs, Check the related codes |
|
| |
of the Cover Open Error |
|
| |
|
| 2. | Replace the Main Control board or Cover Open |
|
|
| Sensor. |
|
|
| (Service Parts : Figure 9, chapter 5) |
|
|
|
|
Samsung Electronics |