Samsung ML-D1630A manual Getting Started, Setting up the hardware

Page 21

3 Getting Started

This chapter gives you step-by-step instructions for setting up the machine.

This chapter includes:

•Setting up the hardware

•Setting up the network

•Using a wired network

•Using a wireless network

•Altitude adjustment

Setting up the hardware

This section shows the steps to set up the hardware which is explained in the Quick Install Guide. Make sure you read Quick Install Guide and complete following steps.

1Select a stable location.

Select a level, stable place with adequate space for air circulation. Allow extra space to open covers and trays.

The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table.

Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the altitude setting to optimize your printing. See page 3.9 for more information.

Place the machine on a flat and stable surface for not letting it lean more than 2 mm (0.08 inches). Otherwise, it may affect the printing quality.

2Unpack the machine and check all the enclosed items.

3Remove the tape holding the machine tightly.

4Install both the toner cartridge.

5Load paper. (See "Loading paper in the tray" on page 4.5.)

6Make sure that all the cables are connected to the machine.

7Turn the machine on.

8Install the software. See Software section.

Caution

This equipment will be inoperable when mains power fails.

Note

When the printer driver is in installation process, the driver installer detects the locale information of your operating system, and sets the default paper size for your machine. If you use the different Windows locale, you must change the paper size of your machine for matching your commonly used paper size. Go to the printer properties to change the paper size after installation completes.

Caution

When you move the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to the machine or bad printing quality.

5 Kg (11 lbs)

3.1 <Getting Started>

Page 20 Page 22
Image 21
Page 20 Page 22
Contents User’s Guide Page Contact Samsung worldwide Singapore Contents Troubleshooting MaintenanceOrdering supplies and accessories SpecificationsFinding more information About this user’s guideImportant Precautions and Safety Information Safety and Regulatory InformationOzone Safety Environmental and Safety ConsiderationCalifornia USA Only RecyclingFCC Statement for Wireless LAN use United States of AmericaDeclaration of Conformity European Countries Replacing the Fitted Plug for UK Only Regulatory Compliance StatementsOpenssl License Vii Special features Special features Machine overview Control panel overviewIntroduction Front view Machine overviewRear view Display Control panel overviewSupplied software Software overviewSystem requirements Printer driver featuresOperating Requirements recommended System MacintoshGetting Started Setting up the hardwareUsing a wired network Setting up the networkPrinting Configuration report Setting IP addressInstalling the software Network parameter settingOpen Control Panel Open System Preferences CenterChecking your Network Environments Using a wireless networkOpen Control Panel Dhcp IP assignment Connect your machine to the network,Restoring factory default settings Using SyncThru Web Service Configuring the machine’s wireless networkNow go to Installing the software Altitude adjustment Selecting print media Selecting and loading print mediaGuidelines for selecting and storing print media Type Size Dimensions Weighta Capacityb Specifications on print mediaMedia type Guidelines Guidelines for special print mediaChanging the paper size in the tray Loading paper in the traySelect Printers and Faxes Setting the paper size and typeBasic printing Canceling a print jobPrinting a document Double-click the Samsung ML-1630W Series iconCleaning your machine MaintenanceCleaning the outside Cleaning the insideMaintenance Redistributing toner Maintaining the cartridgeMaintenance Replacing the toner cartridge Items Yield Average Maintenance PartsManaging your machine from the website To access SyncThru Web ServiceStatus display Explanation Solution TroubleshootingTips for avoiding paper jams Clearing paper jamsTroubleshooting Rear and inside the machine Troubleshooting Exit area Inner cover Open Understanding display messagesPaper feeding problems Solving other problemsPrinting problems Condition Suggested solutionsCondition Possible cause Suggested solutions Printing quality problems Misformed Condition Suggested solutions Curl or waveCharacters SkewCondition Suggested solutions Loose toner Common Windows problemsCharacter Voids Horizontal stripesCommon Macintosh problems Common Linux problemsProblem Suggested solutions Program, click File Print IllustratorHow to purchase Ordering supplies and accessoriesSupplies How to purchase SuppliesGeneral specifications SpecificationsPrinter specifications General specifications Printer specificationsControl Panel GlossaryIndex Software section Contents Sharing the Printer Locally Using Your Printer in Linux Installing Software for Local Printing Installing Printer SoftwareSelect Typical installation for a local printer. Click Next Custom InstallationSelect the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Installing Printer Software in Windows Custom Installation Installing Printer Software in Windows Removing Printer Software Reinstalling Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentPrinter Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Paper Tab Layout TabToner Save Mode ResolutionGraphics Tab DarknessExtras Tab About TabPrinter Tab Using Help Using a Favorite SettingPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Posters Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size Using an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlaySetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Double-clickPrinters and FaxesPrinter Setting Troubleshooting GuideUnderstanding Smart Panel Buy NowUsing Printer Settings Utility Opening the Troubleshooting GuideChanging the Smart Panel Program Settings Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Click Uninstall Uninstalling the Unified Linux DriverUsing the Unified Driver Configurator Using SetIP programOpening the Unified Driver Configurator Starting the programPorts Configuration Printers ConfigurationPrinting from Applications Configuring Printer Properties Printing a DocumentFollowing four tabs display at the top of the window Printing FilesInstalling Software Uninstalling softwareSelect Uninstall and click Uninstall For a Network-connected Setting Up the PrinterClick Add on the Printer List Select Socket/HP Jet Direct in Printer TypeFor a USB-connected Printing Changing Printer SettingsPrinting a Document GraphicsSelect the page order from the Layout Direction option Printing Multiple Pages on One Sheet of PaperIndex Page Rev.3.00

ML-D1630A specifications

The Samsung ML-D1630A is a high-quality toner cartridge designed specifically for use with Samsung printers, particularly the ML-1630 series. Known for its reliability and impressive print output, this toner cartridge is a popular choice among both home offices and small businesses.

One of the standout features of the ML-D1630A is its impressive yield. With a capacity of approximately 2,000 pages, this cartridge allows users to print a significant volume of documents before needing a replacement. This feature is particularly advantageous for those who engage in high-volume printing and seek to minimize interruptions in workflow.

The ML-D1630A utilizes laser printing technology, which is renowned for producing sharp, monochrome text and detailed graphics. Laser printers are generally faster than inkjet printers, making the ML-1630 series suitable for users who require rapid print speeds without compromising on quality. The precise laser technology ensures that each printed page is crisp, clear, and professional-looking, ideal for business documents, reports, and presentations.

In terms of compatibility, the ML-D1630A is engineered to work seamlessly with various models within the Samsung ML-1630 range. This compatibility means that users can expect straightforward installation and reliable performance, avoiding issues that may arise with third-party cartridges. Additionally, Samsung's reputation for durability ensures that the cartridge maintains its print quality throughout its entire lifespan.

The cartridge itself is designed with environmentally friendly considerations in mind. Samsung promotes eco-conscious printing solutions, and the ML-D1630A is no exception. The cartridge is often designed for easy recycling, helping users minimize their ecological footprint.

Another notable characteristic of the ML-D1630A is its ability to produce high-quality prints at a cost-effective price point. With a balance of performance and affordability, it provides users with excellent value for money.

In summary, the Samsung ML-D1630A toner cartridge stands out due to its high yield, laser technology, compatibility with Samsung printers, environmental considerations, and cost-effectiveness. Whether utilized in a home office or a small business setting, it consistently delivers reliable performance and outstanding print quality.
Top Page Image Contents