Samsung ML-2850D manual Printing a configuration, Maintenance parts, Items Yield Average

Page 33

5Remove the paper protecting the toner cartridge by pulling the packing tape.

Note

• Refer to the helpful pictures on the cartridge wrapping paper.

Caution

• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.

Do not touch the green surface underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.

6Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the printer.

Tabs on the sides of the cartridge and corresponding grooves within the printer will guide the cartridge into the correct position until it locks into place completely.

7Close the front cover. Make sure that the cover is securely closed.

Printing a configuration page

You can print a configuration page to view current printer settings, or to help troubleshoot printer problems.

Press and hold the Cancel button for about 5 seconds.

A configuration page prints out.

Maintenance parts

To avoid print quality and paper feed problems resulting from worn parts and to maintain your machine in top working condition the following items will need to be replaced at the specified number of pages or when the life span of each item has expired.

Items

Yield (Average)

 

 

Transfer roller

Approx. 50,000 pages

 

 

Fuser unit

Approx. 50,000 pages

 

 

Pick-up roller

Approx. 50,000 pages

 

 

Samsung highly recommends that an authorized service provider, dealer or the retailer where you bought printer performs this maintenance activity. The warranty does not cover the replacement of the maintenance parts after their lifespan.

The warranty does not cover the replacement of the maintenance parts after their lifespan.

8.4 <Maintenance>

Image 33
Contents Page Page Contact Samsung worldwide Spain Contents Troubleshooting MaintenanceInstalling accessories SpecificationsImportant Precautions and Safety Information Safety and Regulatory InformationEnvironmental and Safety Consideration Laser Safety StatementPower Saver Ozone SafetyRecycling Radio Frequency EmissionsReplacing the Fitted Plug for UK Only Declaration of Conformity European CountriesCanadian Radio Interference Regulations Approvals and CertificationsPage Introduction Special featuresFeatures ML-2850D ML-2851ND Printer overviewFront view Understanding the LEDs Control panel overviewRear view Status DescriptionFinding more information Setting up the hardwareClick Printer Setting Altitude adjustmentClick Printer Setting Click Emulation Changing the font settingUsing toner save mode Basic setupPrinting a demo Using toner save mode Printing a demoPrinter driver features Software overviewSupplied software Windows System requirementsLinux MacintoshUsing SetIP program Supported operating systemsDouble click Application SetIP Selecting print media Loading print mediaSupported sizes of paper Type Size Dimensions Weighta CapacitybGuidelines for selecting and storing print media Guidelines for special print mediaType Guidelines Loading paper Changing the size of the paper in the tray Using the tray 1 or the optional trayLoad the paper with the side to be printed on facing up Using manual feederKnowing an output location Printing with a prescribed paper sizeSlovakia CzechPrinting a document Canceling a print job Canceling a print jobBasic printing Printing a documentAccessory Ordering supplies and accessoriesHow to purchase Toner cartridgeCleaning the printer MaintenanceCleaning the outside of the printer Cleaning the inside of the printerRedistributing toner cartridge Maintaining the toner cartridgeToner cartridge storage Expected cartridge lifeReplacing the toner cartridge Printing a configuration Maintenance partsItems Yield Average Clearing paper jams TroubleshootingPaper feed area TrayManual tray Around the toner cartridgePaper exit area Duplex unit areaDuplex jam Tips for avoiding paper jams Solving general printing problems Troubleshooting checklistDpi Normal. See Dpi Best, change it toSolving print quality problems Gray Condition Suggested solutions Vertical linesBackground Toner smearCommon Windows problems Common Linux problems Common PostScript problemsCommon Macintosh problems Precautions to take when installing accessories Installing accessoriesInstalling a memory module Disconnect the power cordActivating the added memory in the PS printer properties Printer specifications SpecificationsSpecifications and description MB optional memory availableIndex Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Installing Software for Local Printing Installing Printer SoftwareTypical Installation Select Typical installation for a local printer. Click NextCustom Installation Select the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Select the components you want to reinstall and click Next Reinstalling Printer SoftwareNext Removing Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentPrinter Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Layout Tab Paper TabPaper Orientation Graphics Tab Image ModeSource Scaling PrintingExtras Tab Using Help Using a Favorite SettingAbout Tab Printer TabPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersPrinting a Reduced or Enlarged Document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size NoneUsing an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlayAdvanced Using Windows PostScript DriverSetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Double-clickPrinters and FaxesToner Level Understanding Smart PanelUsing Printer Settings Utility Opening the Troubleshooting GuideChanging the Smart Panel Program Settings Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverWhen the welcome screen appears, click Next Getting StartedWhen the installation is complete, click Finish Uninstalling the Unified Linux DriverClick Uninstall Click Next Click FinishPrinters Configuration Using the Unified Driver ConfiguratorOpening the Unified Driver Configurator Double-clickUnified Driver Configurator on the desktopPorts Configuration Configuring Printer PropertiesClasses Tab Classes tab shows a list of available printer classesPrinting from Applications Printing FilesFile menu Installing the printer driver Installing SoftwareUninstalling the printer driver Printer driverFor a Network-connected Setting Up the PrinterFor a USB-connected Mac OS 8.6 ~Printing Changing Printer SettingsPrinting a Document LayoutPrinter Features GraphicsPaper Printing Multiple Pages on One Sheet of Paper Duplex PrintingSelect the page order from the Layout Direction option Index Windows 15 toner save 15 true-type option Rev