Samsung SRP-250 Series specifications Control Codes, Star mode

CONTROL CODES

STAR mode

Control code	Hexadecimal code		Function
<ESC> "C" n	1B	43 n	Set page length at n lines
<ESC> "R" n	1B	52 n	Select international character set.
			Default is according to the dip switch
			settings 3, 4 and 5.
<ESC> "M"	1B	4D	Select 7 × 7(Half dots) character
			size(Default setting)
<ESC> "P"	1B	50	Select 9×7(Half dots) character size
<SO>	0E		Select expanded character mode
<SI>	0F		Select inverted print mode
<DC2>	12		Cancel inverted print mode
<DC4>	14		Cancel expanded character
			mode(Default setting)
<ESC> "W" "1"	1B	57 31	Select expanded character mode
<ESC> "W" <1>	1B	57 01
<ESC> "W" "0"	1B	57 30	Cancel expanded character mode
<ESC> "W" <0>	1B	57 00	(Default setting)
<ESC> "4"	1B	34	Red color print selection
<ESC> "5"	1B	35	Red color print deselection
<ESC> "E"	1B	45	Emphasized print mode selection
<ESC> "F"	1B	46	Emphasized print mode deselection
			(Default setting)
<ESC> "a" n	1B	61 n	Feed paper n lines
<ESC><BEL>n1 n2	1B	07 n1 n2	Adjust drive pulse width for peripheral
			unit(Default setting)
<BEL>	07		Deferred drive command "A" for
			peripheral unit 1
<FS>	1C		Immediate drive command "B" for
			peripheral unit 1
<SUB>	1A		Immediate drive command for
			peripheral unit 2
<EM>	19		Immediate drive command for
			peripheral unit 2
<CAN>	18		Cancel print data in buffer
<ESC> "@"	1B	40	Initialize printer
<ESC> "e" "0"	1B	65 30	FEED switch valid
<ESC> "e" <0>	1B	65 00	(Default setting)
<DC3>	13		Set deselect mode
<DC4>	14		Set select mode
<ESC> U n	1B	55 n	Set or Cancel uni-direction mode
<ESC> - n	1B	2D n	Set or Cancel underline mode
Control code	Hexadecimal code		Function
<ESC> "e" "1"	1B	65 31	FEED switch invalid
<ESC> "e" <1>	1B	65 01