Samsung SRP-250 Series specifications Connecting Interface Cable and Drawer Cable to the printer

Page 7

2-2. Connecting Interface Cable and Drawer Cable to the printer

Connect the Host Computer(POS/ECR) to the printer using an interface cable that matches the specifications of the printer and the Host computer(POS/ECR). Be sure to use a drawer that matches the printer's specification.

1). Turn off the printer and the Host computer(POS/ECR).

2). Plug the serial interface cable connector into the printer’s interface connector, then tighten the screws on both sides of the connector. In case of the parallel interface, squeeze the wire clips on the printer together until they lock in place on both sides of the connector.

3). Plug the drawer cable into the drawer kick-out connector on the back of the printer next to the serial/parallel connector. Do not connect a telephone line to the drawer kick-out connector; otherwise the printer and the telephone line may be damaged.

6

Image 7

Contents Series Introduction Table of Contents Unpacking Checking the Contents of the printer boxFunctions Connecting the AC adapter to the printer Connecting the cablesConnecting Interface Cable and Drawer Cable to the printer Ribbon Cassette Installation Installing the roll paperRoll Paper Installation Page Page Page Setting the DIP switches Refer to the following table Print ¡ ? ¡ ±Transmission speed Parallel Interface Specification Hexadecimal Dumping Self-test printing Please press the Feed button Self testCode Table 2 PC850 Multilingual 3 PC860 Portuguese 4 PC 863 Canadian French 5 PC 865 Nordic International Character Command Notation Control CommandsBit Off/On Hex Decimal Function DLE EOT n= 3 Error status Bit Off/On Hex DLE ENQ nESC SP n ESC ! nXk d1 Dyx × xk ESC % nNumber ESC * m nL nH d1…dkHorizontal Direction Dots Dot DensityESC = n ESC 3 nESC ? n ESC D n1... nk NUL ESC @ESC K n ESC E nESC G n ESC J nJustification ESC R nESC U n ESC a nESC c 5 n ESC c 3 nESC d n ESC p m t1 t2 ESC mPrint color ESC t n ESC Printer ID Specification ID hexadecimalGS I n GS V m n Print modeGS r n Bit Off/On Hex Decimal Status Appendix a ConnectorsInterface Connector Pin No Signal Name Drawer Connector Appendix B SpecificationRemoving Jammed Paper a Appendix CPage Removing Jammed Paper B Page Control Codes Star modeCitizen mode