Samsung HL-P5067W Connecting a Camcorder, Connecting a DVD Player, Connecting to Y,PB,PR

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a Camcorder to your TV. You can use your camcorder to view tapes without using a VCR.

1	Locate the A/V output jacks on the
	camcorder. They are usually found on
	the side or back of the camcorder.
	Connect a set of audio cables
2
	between the AUDIO IN jacks on the
	TV and the AUDIO OUT jacks on the
	camcorder. If you have a mono

1

Camcorder

Output Jacks

	Camcorder, connect L(mono) to the
	Camcorder audio out using only one
	audio cable.
	Connect a video cable between the
3
	VIDEO IN (or S-VIDEO IN) jack on

TV Rear of right side

or

Camcorder

the TV and the VIDEO OUT jack on the Camcorder. The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your Camcorder is stereo, you need to connect a set of two cables.

3

2

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

Connecting to Y,PB,PR

1 Connect a set of audio cables between the COMPONENT (1 or 2) audio (L,R) in jacks on the TV and the AUDIO OUT jacks on the DVD player.

2 To enable Component video viewing, connect a set of video cables between the COMPONENT (1 or 2) VIDEO (Y, PB, PR) in jacks on the TV and VIDEO (Y/PB/PR or Y/CB/CR) OUT jacks on the DVD player.

Note: For an explanation of Component video, see your DVD player's owner's manual.

TV Rear Panel

Incoming

Cable or

Antenna

2

1

DVD Player

5

Downloaded from www.Manualslib.com manuals search engine