Samsung HL-P5067W, HL-P6167W, HL-P5667W Replacing the Lamp, Why do I need to replace the lamp?

Page 14

Replacing the Lamp

Why do I need to replace the lamp?

The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.

When do I need to replace it?

It should be replaced when the screen becomes darker, less clear or when all three LEDs on the front (Timer, Lamp, & Temp.) are flashing.

Check before lamp replacement

1.The lamp must be the same code number and type.

2.The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case.

3.After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center.

Caution

1.Replace with the correct code numbered lamp to avoid damage to the TV.

2.Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot.

3.Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside the cover as it may cause poor screen quality, electric shock or fire.

4.Do not place the old lamp near flammable objects or within the reach of children.

5.Be sure to connect this TV directly to an AC wall outlet. If the TV's AC plug is connected to a cable box or other source, it will not allow for proper cool down time.

For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.

 

 

 

 

1

Unplug TV, then use a screwdriver to

4

Separate the Lamp from the engine by

 

remove the screw.

 

holding the handle and pulling it out.

 

 

2 Remove the Lamp cover.

 

 

 

 

 

 

5

 

To reinstall the Lamp, follow these steps

 

 

 

 

in reverse order.

 

 

 

 

 

 

 

 

3

Remove the screw securing the Lamp by

 

 

• Be sure the replacement Lamp is the

using a screwdriver.

 

 

same type.

 

 

 

• After replacing the lamp, align the lamp cover with the groove and secure the screws.

• The TV will not turn on if the lamp cover is not correctly closed (as this will acti- vate the protective circuit).

14

Downloaded from www.Manualslib.com manuals search engine

Image 14
Contents HL-P4667W/HL-P5067W/HL-P5667W/HL-P6167W List of PartsAntennas with 75-ohm Round Leads Connecting VHF and UHF AntennasAntennas with 300-ohm Flat Twin Leads Separate VHF and UHF AntennasCable without a Cable Box Connecting Cable TV and VCRConnecting an Analog Cable Converter Box Cable with a Cable Box that Descrambles All ChannelsConnecting CableCARD Connecting an Analog Cable Converter Box and a VCRConnecting to Y,PB,PR Connecting a CamcorderConnecting a DVD Player Connecting a DTV Set-Top Box Connecting to Audio and Video JacksConnecting to Hdmi High Definition Multimedia Interface Connecting to DVI Digital Visual InterfaceConnecting a Digital Audio System Connecting to an Analog AmplifierRemote Control ´ P.MODEViewing the Menus Turning the TV On and OffViewing the Menus and On-Screen Displays Viewing the DisplaySelecting the Video Signal Source Memorizing the ChannelsPress the … or † button to select Viewing Position Viewing an External Signal SourceSetting the Signal Source Alternate methodCheck before lamp replacement Why do I need to replace the lamp?When do I need to replace it? Replacing the LampFront Panel LED Indicators TroubleshootingMemo
Related manuals
Manual 16 pages 53.02 Kb