| 페이지 2 / 2 |
All Contents Copyright © 2001 - 2010
SAMSUNG Electronics Co., Ltd.
Optical Disc Drive
The write speed for a disc can be restricted if:
1.The disc has bad properties, or there are other discs with bad properties under
the same ID.
The drive examines the disc properties to determine the best write conditions for the type of disc. Because the two types of disc have the same property data but different properties, it is often not possible to use the same settings. It is necessary to decrease the writing speed to make the writing more stable.
If discs from two different disc makers have the same writing speed according to the labels, but actually have different writing speeds, it is necessary to reduce the writing speed.
2.Samsung standards to decrease writing speed
Standard 1: If there are
Standard 2: Discs for which the speed was reduced, will be examined again. If low- speed discs are no longer available in the market under the same ID as a high- speed disc, the decreased writing speed will no longer apply to the
Note
It is possible that you do not get good writing quality with discs from manufacturers that are not registered in the drive's firmware.
We thus recommend that you only use discs from recommended companies. Always make sure that the writing was successful before you put the disc in storage. This is very important when you want to store important data. (Samsung is not responsible for any loss caused by a backup failure)
Note
We update the list of supported media on a regular basis and make them available in our firmware upgrades.
Top
file://D:\HEARTSOME_WORK\0_PROJECT_LOCALIZATION\3_TOSHIBA_SAMS... 4/2/2010