Samsung S27B970D user manual Preparing for Calibration, Completing Calibration

Using NCE (Natural Color Expert)

Preparing for Calibration

1.Select the connected calibrator, then click “Next.”

2.If the calibrator initialization screen appears, start measurement using the calibrator.

	Initialize	Connect Calibrator. The Connected Calibrator automatically appears in Select a Calibrator.
Calibration	Place a Calibrator
	Calibrating	If several calibrators are connected, then select a calibrator by going to Select a Calibrator
		and pressing Next.
	Result

Connect a Calibrator

Calibrator

Select a Calibrator

Calibration device not found

Back Next Cancel

3.Attach the calibrator to the indicated spot on the screen, then click “Next."

NOTE

•  Set the screensaver time to at least 30 minutes before starting measurement.

•  The calibration process will be performed in full screen. To cancel a calibration that is in progress, press the ESC key.

4.Measurement will be performed.

5.The settings for Color Gamut, Brightness, Black Level, White Point, and RGB Gamma can be finely adjusted.

Completing Calibration

After calibration, you can compare the screens before and after the calibration using the After

/Before buttons.

	Initialize	Calibration complete. Remove Calibrator from the screen. Using the Before/After buttons
Calibration	Place a Calibrator
		you can compare the screens before and after Calibration, Fine-tuning can be done using
	Calibrating	After Image RGB Offset.
	Result

		Target	Result
	Red (x,y)	: (0.6400, 0.3300)	(0.6401, 0.3300)
	Green (x,y)	: (0.3000, 0.6000)	(0.3000, 0.6002)
	Blue (x,y)	: (0.1500, 0.0600)	(0.1564, 0.0635)
	White (x,y)	: (0.3127, 0.3290)	(0.3128, 0.3292)
	White Point	: D65	6495 K
Before < After	Brightness	: 73 cd	73.1 cd
	Black Level	: Skipped	0.16 cd
	RGB Gamma	: LUT/LUT/LUT	LUT/LUT/LUT

EditSave Finish

Add or delete images as desired using the "Custom" category.

Click “Finish” to save the calibration results to Preference on the monitor.

27