Samsung 73V, 93V manual Useful Tips

Page 37

Warning Messages

If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.

Environment

The location and the position of the monitor may influence the quality and other features of the monitor.

1.if there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room.

2.Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor.

Useful Tips

zA monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact a service center or your dealer.

zJudging the monitor's working condition

If there is no image on the screen or a "Not Optimum Mode" "Recommanded mode 1280 x 1024 60Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on.

{If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition.

{In this case, check the computer for trouble.

Image 37
Contents Samtron 73V/93V Select Model Name Do not use a damaged or loose plug Do not drop the monitor when moving itUse only a properly grounded plug and receptacle Set down the monitor carefully Place the monitor on a flat and stable surfaceDo not place the monitor face down Do not spray water or detergent directly on the monitorOther Do not use or store inflammable substances near the monitor Do not cover the vents on the monitor cabinetNever insert anything metallic into the monitor openings Page Unpacking Front Rear Power indicatorSub 15-pin port Unpacking Click here to see an animation clip Use this button for auto adjustment direct access Page Attaching a base Monitor AssemblyClick Windows XP/2000 Driver Windows XP/2000Microsoft Windows XP Operating System Page Microsoft Windows NT Operating System How to install Click Start , Setting , Control PanelLinux Operating System Select Model Name Attaching a base Click OK button Monitor driver installation is completed Page Page How to install Click Start , Setting , Control Panel Auto Description MenuMenu Description Picture Menu Description Brightness Adjust BrightnessBrightness Menu Description Play/StopContrast Color Tone Color Control GammaCoarse Fine Sharpness Position OSDLanguage Position Positon Transparency Display Time SetupInformation Can you see Check Signal Cable on the screen? SymptomSolutions No images on the screen. I cannot turn on the monitorPanel → Display → Settings Self-Test Feature Check Useful Tips General PowerSaver Preset Timing Modes Preset Timing ModesHorizontal Frequency Vertical FrequencyHorizontal 31 ~ 81 kHz Vertical 56 ~ 75 Hz Less than 38W Preset Timing Modes Samtron Europe ServiceFor Better Display TermsAuthority