Samsung 76E, 76V, 77V manual Clean

Page 6

Notational

Power

Installation

Clean

Other

Main > Safety Instructions > Clean

When cleaning the monitor case or the surface of the CRT, wipe with a slightly moistened, soft fabric.

Do not clean Flat monitor with water. Use a water-diluted mild detergent.

(Some detergents contain significant amounts of alcohol-based solvents, which can damage (color change) or crack the monitor case. The antiglare/anti-static surface coating on the CRT may also be affected.)

Dilute the detergent (1:10 ratio) with water before using.

Do not spray detergent directly on the monitor.

Use the recommended detergent with a smooth cloth.

zYou can prevent the coated CRT from being damaged or the monitor cabinet from being dissolved, cracked or discolored.

zYou can buy a recommended detergent at any Samsung Service Center.

If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth.

zA dirty connector can cause an electric shock or fire.

Do not set a glass of water, chemicals or any small metal objects on the monitor.

zThis may cause damage, electric shock or a fire.

zIf a foreign substance gets into the monitor, disconnect the plug and then contact a service center.

Image 6

Contents Samtron 76E/76V/77V Main Index Notational Power Do not use a damaged or loose plugUse only a properly grounded plug and recepticle Place the monitor on a flat and stable surface Do not drop the monitor when moving itDo not cover the vents on the monitor cabinet Set down the monitor carefullyClean Do not use or store inflammable substances near the monitor OtherDo not place any heavy objects on the monitor Never insert anything metallic into the monitor openingsKeep the monitor away from any magnetic substances Unpacking Power Cord Stand Quick Setup Guide Warranty CardUsers Guide Driver Installation CD USB Hub Option Monitor and StandMonitor and Stand Power Cord Quick Setup Guide Users Guide Driver Installation CDPower button Use this button to turn the monitor on and off Power button FrontRear Bottom Connecting Your Monitor Click Windows ME Driver Installing the Monitor DriverWindows ME Windows XP/2000Page Microsoft Windows XP Operating System Page How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating System Linux Operating SystemBase Installation Attaching the Base Removing the BaseOn Screen Display OSD Menu System Samtron No images on the screen. I cannot turn on the monitor Can you see No Connection, Check Signal Cable onCheck List Screen Display OSD Menu toScreen shows strange colors or just black and white Screen suddenly has become unbalancedPage Control Panel, Display, Settings QuestionSelf-Test Feature Check Judging the monitors working condition General Picture TubePowerSaver State Normal Operation Power-off Mode EPA/ENERGYHorizontal Frequency Preset Timing ModesPreset Timing Modes Vertical FrequencySamtron State Normal Operation Power-off Mode EPA/ENERGY Preset Timing Modes General Service Samtron U.S.ADot Pitch ResolutionTerms Interlace and Non-Interlace MethodsRegulatory Main Information RegulatoryEuropean Notice Europe only VcciEnvironmental Requirements TCO Development Authority