CLEANING THE LINT FILTER

1.Grasp the filter handle and pull towards you.

2.Pull the filter up out of the holder.

3.Open the filter and brush away

the lint with your hand.

4.Fold the filter together and put it back in the filter hol- der.

 

2

The filter may

1

require cleaning if lime scale deposits are present; see Chapter 10, Care and Cleaning.

EMPTYING THE CONDENSATION WATER CONTAI-

NER

Empty the condensation water container after each tumble drying.

Pull out the condensation water container, empty the water and put the container back.

If the container becomes too full, the pro- gramme will be interrupted and an error messa- ge will be displayed in the text field. Empty the

container and press the button and the programme will continue from where it was in-

terrupted, see also Chapter 12, Trouble shoo- ting, heading Fault indications.

NOTE

Do not pull out the condensation water con- tainer while the machine is running.

HINT

The condensation water is soft, and is therefore suitable for use in a steam iron. Strain the water through a coffee paper filter before use.

If you want the water to be emptied automa- tically, see the Installation instructions.

AFTER TUMBLE DRYING

 

7Turn off the main switch

.

AUTOMATIC DRAINING

See the Installation Instructions if you require the water to be drained automatically.

TEMPORARY PROGRAMME

If you wish to run a programme without alte- ring the pre-set programmes P1 - P4 , you can create a temporary programme; see Chapter 10 - Making your own drying programmes.

14

Page 14
Image 14
Maytag MDE 9901 manual Cleaning the Lint Filter, Ner, Hint, After Tumble Drying, Automatic Draining, Temporary Programme