Maytag MDE 9901 manual 5START Tumble Drying, During Tumble Drying, 6DRYING Programme Ended

5START TUMBLE DRYING

Press the button.

The text at the lower edge of the display indicates that the programme has star- ted. The text field of the display shows the cur- rent stage of the programme while it is in pro- gress.

NOTE

If the child lock is on, the button must be held down for 3 seconds in order for the programme to start. See Chapter 3, Child safe- ty, for details of how to switch the child lock on and off.

Remaining drying time

The approximate remaining drying time is esti- mated within four minutes of the start of the drying programme. Only the time for the Ti- med dry programme and Air fluff programme is indicated for venting dryers.

The time is shown in hours and minutes (al- ternating) at the bottom right of the display

together with the symbol. Note that the time also includes cooling.

DURING TUMBLE DRYING

Putting in more washing

Open the door and the drum will stop automatically. To restart: Close the door and

press the button.

Changing programme

Press the button for three seconds. The programme will then be zero set and you can choose a new programme.

6DRYING PROGRAMME ENDED

The text on the bottom edge of the display indicates that the programme has

ended.

If the Anti-crease option is activated, the drum will rotate every minute for a certain pe- riod after cooling. The text [“Anti-crease”] is indicated in the display during this period. The programme can be stopped at any time by ope- ning the door.

When the programme ends:

•Clean the lint filter after each drying opera- tion, see below. An error message will be dis- played if the lint filter needs to be cleaned.

•Empty the condensation water container.

WARNING!

If the lint filter becomes completely clogged the overheat protection device may trigger. The device must then be reset to enable the machi- ne to be started, see Chapter 12, Trouble shoo- ting.

13