12 TROUBLE SHOOTING
THE MACHINE WILL NOT START
Check that:
•The door is properly closed.
•The main switch is pressed in.
•You have correctly set the required program- me or the required time in the timed dry pro- gramme.
•You have not choosen Delayed start.
•The electric plug, if any, is firmly inserted in its socket.
•All fuses are intact. Switch two fuses over. It is not always possible to see directly if a fuse has blown.
•The overheating device has not triggered, see below.
OVERHEATING PROTECTION
The dryer is designed with an overheat protec- tion switch that will automatically turn the machine off if the temperature gets too high. The machine will not start until it has cooled down sufficiently.
If the unit shuts down because of overheating, check that the lint filter exhaust hose, vent duct, and the condenser unit are free of lint. These components need to be cleaned on a regular basis. Additionally, the lint filter may need to be cleaned with warm, soapy water and a soft brush a few times a year to ensure the filter screen is not blocked. Using dryer sheets (not recommended) can also cause this problem.
Should the machine turn itself off because of overheating, it will not be possible to restart the unit until it has cooled down sufficiently. This could possibly take up to thirty minutes.
To restart the unit once it has cooled down, press the ”Start” button.
NOTE:
If your dryer overheats frequently, it may not be vented properly or the room in which it is loca- ted may not have sufficient air circulation. Con- tact your installer to have these issues checked out.
NO INTERIOR LIGHTING
Check that:
•The main switch is pressed in.
•The electric plug, if any, is firmly inserted in its socket.
•All fuses are intact. Switch two fuses over. It is not always possible to see directly if a fuse has blown.
•The bulb is not burnt out. The lamp is located at the top of the dryer just inside the door. Screw off the plastic cover protecting the bulb and screw out the bulb and replace it if it is faulty.
EXCESSIVE DRYING TIME
Empty the water container and check that the lint filter and the condenser are not clogged, see Chapter 11, Care and Cleaning. Excessive drying times can also be caused by the machine being installed in a very confined space and by the air in the room (which cools the machine) becoming too warm. In this situation make sure that ventilation is improved, eg, by opening doors and/or windows.
26
