buttons.
RESET PROGRAMME
If you wish to revert to the settings which a pre- set programme had at the time when the dryer was supplied, you can reset the programme. Proceed as follows:
1.Hold down the programme button for the programme that you wish to reset.
2.Press the Enter button once.
3.Release the programme button.
The programme for the button is now reset to its settings when the dryer was supplied.
STOP FLASHES IN THE DISPLAY
Start Stop
The programme has stopped temporarily be- cause the door has been opened, the main po- wer switch has been turned off or the power supply has been interrupted.
To restart: Press the 
button.
To interrupt the programme completely:
Press the 
button for three seconds.
28
