Samsung 911NT, 711NT manual Client

Page 67

135 MHz

Power Consumption

AC 100 - 240 V ~ (+/- 10 %), 50/60 Hz

Signal Cable

15pin to 15pin D-sub cable, Detachable

Dimensions (W x H x D) / Weight

370.0 x 342.3 x 69 mm / 14.6 x 13.5 x 2.7 inch (Without Stand)

370.0x 404.3 x 200 mm / 14.6 x 15.9 x 7.9 inch (With Basic Stand), 6.2 Kg / 13.7 (lbs) VESA Mounting Interface

100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.) Environmental considerations

Operating

Temperature : 50°F ~ 104°F (10°C ~ 40°C)

 

Humidity : 10 % ~ 80 %, non-condensing

Storage

Temperature : -4°F ~ 113°F (-20°C ~ 45°C)

 

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

 

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1 ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.

For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160.

Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas.

(Class B equipment emits less electromagnetic waves than Class A equipment.)

Client

 

Item

Specifications

LAN

100 Mbps

USB

2.0 x 4Ports

Internet Browser

MS Internet Explorer

Image 67
Contents SyncMaster 711NT/ 911NT Notation PowerPage Installation Page Cleaning and Using Others Page Page Proper Seating Posture During Monitor Use What is a network monitor? FeaturesPackage Contents Front Your MonitorRear Click here to see an animation clipUSB Connecting Cables When used as a normal monitor Connecting CablesExternal Device Connection Tilt angle Using the StandSwivel stand Using Other StandsAttaching a Base Page Connecting a Client Monitor Setup Client Monitor Page Page Citrix ICA Client ICA Connecting to the Host PCPage Page Page Page Page Connection is run automatically after finishing a login Internet Options Configuring Client Monitor EnvironmentTerminal Host PC Client License Network ICA Client Setup Desktop Page Page Page Monitor Driver Installing the Monitor Driver AutomaticInstalling the Monitor Driver Manual Page Page Page Click the Close button then click the OK button continually Page Natural Color Natural ColorUninstalling the Natural Color Software Program Installing the Natural Color SoftwareMagicTune Uninstall Control Buttons OSD Lock & Unlock Direct FunctionsButton MagicBright VolumePicture OSD FunctionColor Not available in MagicColor mode of Full and IntelligentImage Changes the clearance of image OSD SetupInformation Menu → Check List Refer to the Preset Timing ModesPreset Timing Modes Refer to Connecting the Monitor Page Self-Test Self-Test Feature CheckUseful Tips EnvironmentSpecifications Client Preset Timing Modes PowerSaverServer Requirement Preset Timing Modes Specifications Client PowerSaver Preset Timing Modes Contact Samsung Worldwide Trinidad Tobago Venezuela Dot Pitch TermsVertical Frequency Authority For Better DisplayPage Product Information Image Retention Free