Samsung 711NT, 911NT manual Server Requirement, PowerSaver

Photo	JPEG,BMP
Photo	MPEG1,WMV
Audio	MP3, WAV, WMA
Video	JPEG, BMP

Server Requirement
	Connect Client No	CPU	RAM	Ethernet	OS
Minimum	Just can load Server	P3 400 MHz	64 Mbyte	100 Mbps	windows 2003
SPEC	Program				Server
Recommend	1	P4 1.0 GHz	256 Mbyte
SPEC
	2~4	P4 2.4 GHz	512 Mbyte	100 Mbps	windows 2003
	5~7	P4 3.0 GHz	1 Gbyte		Server
	8~10	P4 3.2 GHz	2 Gbyte

The content presented above is the result of testing a specific server. The information may change as the server may be different. For some products, the OS may not be supported. When purchasing a product, make sure to check whether or not the OS is supported.

PowerSaver

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

State	Normal Operation	Power saving mode	Power off
			EPA/ENERGY 2000
Power Indicator	Green	Green, Blinking	Off
Power Consumption	Less than 50 W	Less than 4.7 W	Less than 2.7 W

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the