Samsung 700NF Menu Position, SUB or BNC, Menu screen is displayed, Position adjustment screen Use

Adjusting Your Monitor

D-SUB/BNC
	RGB
	A d v a n c e d
	D e g a u s s
	R e c a l l
+++	Sync . Input Type
G
	Video Input Level
	D - SUB/BNC

: Access Function

D - SUB/BNC

D - SUB BNC

:Previous Menu

Menu Position

RGB

Menu

Menu Position

Menu Duration

Languages

: Access Function

Menu Position

2

8

:Previous Menu

Use this menu to choose between the signal source connected to the BNC connector input and the signal source connected to the D-SUB connector input.

1	With the menu off, push the			button.
	Push the	button or	button until the
	“Advanced” screen is displayed.
2	Push the	button or	button to select
	D-SUB/BNC.
3	Push the	button to open the D-SUB/
	BNC selection screen.
4	Use the	button or	button to select
	D-SUB or BNC.

NOTE: When you are finished, wait for a few seconds and the screen will blank then display the image from the new signal source (Other computer). A cable must be connected to both inputs to use this function.

You can change the position where the OSD menu appears on your monitor.

1	With the menu off, push the				button.
	Push the	button or		button until the
	“Menu” screen is displayed.
2	Push the	button or		button to select
	Menu Position.
3	Push the	button to open the menu
	position adjustment screen.
4	Use the	, ,	or	button to place
	the menu in the position you prefer.

English 22