Samsung 244T manual Image Tab Definition

	well as pictures taken by a digital camera or scanner through Windows.
6-Color	z	Saturation - To adjust the chroma.
	z	Hue - To adjust the color tone.

z Reset - To reset the monitor settings to the factory defaults.

Image Tab Definition

Adjusts the Fine , Coarse and Position values.

	z Fine : Removes noise such as horizontal stripes.
	If the noise persists even after Fine tuning, repeat it after adjusting the frequency
	(clock speed).
Image Setup	z Coarse : Removes noise such as vertical stripes.
	Coarse adjustment may move the screen image area.
	You may relocate it to the center using the Horizontal Control menu.
	z Auto Setup : Auto adjustment allows the monitor to self-adjust to the incoming
	video signal. The values of fine, coarse and position are adjusted automatically.
Position	Adjusts the screen location horizontally and vertically.
Sharpness	Changes the clearance of image.

Option Tab Definition

You can configure MagicTune using the following options.

Loads the Preferences Dialog Box. Preferences in use will have an "V" in the check box. To turn on or off any Preference, position the cursor over the box and click.

Preferences	z	Enable task tray menu .
		- To access the MagicTune menus, click the icon on the [task tray menu].
		The menus are not displayed if the [Enable System Tray] is deselected in
		[Options] ' [Basic Settings].
	z Select Language - The language chosen affects only the language of the OSD.
Source Select	z	Analog
	z	Digital
	This refers to the process that optimizes the color and maintains the optimized color.
Color Weakness	z	Off - To cancel Partial Color Blindness Mode.
	z Custom - Partial Color Blindness Test
	z Reset - To reset the monitor settings to the factory defaults.
	When external A/V devices such as VCRs or DVDs are connected to the monitor, PIP
PIP	allows you to watch video from those devices in a small window super-imposed on the PC
	Video signal. (Off / On)
	PIP		Turn the PIP Screen on or off.
	Source		Select the input source for the PIP.
	Size		Change the Size of the PIP window.
	Position
			Change the Position of the PIP window.