Samsung 215TW manual Epa/Energy

Page 69

Power Consumption

Less than 70 W

Dimensions (WxDxH)/ Weight

With stand : 490 x 219.8 x 377 mm (19.3 x 8.7 x 14.8 inch) / 7.5 kg

Without Stand : 490 x 72 x 342.5 mm (19.3 x 2.8 x 13.5 inch)

VESA Mounting Interface

100 mm x 100 mm (for use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature: 50°F ~ 104°F (10°C ~ 40 °C)

 

Humidity: 10% ~ 80%, non-condensing

Storage

Temperature: -4°F ~ 113°F (-20°C ~ 45 °C)

 

Humidity: 5% ~ 95%, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.

zFor example, the number of TFT LCD sub pixels that is contained in this product are 5,292,000.

Note: Design and specifications are subject to change without prior notice.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

State

Normal Operation

Power saving mode

Power off

EPA/ENERGY 2000

(Power S/W off )

 

 

Power indicator

Blue

Blue, Blinking

Black

Power Consumption

Less than 70 W

Less than 2 W

Less than 1 W

(Off-mode)

 

 

 

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Image 69
Contents SyncMaster 215TW Do not use a damaged or loose plug Insert the power plug firmly so that it does not come loose Do not place the product on the floor Do not spray water or detergent directly on the monitor Do not remove cover or back Do not cover the vents on the monitor cabinet Falling product could cause physical damage even death Cable MagicRotation softwareMenu button Available in Analog/DigitalPC Mode Only Available in Analog mode onlyCustom TextPower button / Power indicator Speaker Audio L RGBPR, PB,Y Kensington LockPage Connecting the Monitor Connecting DVD/DTV Set Top Box Connecting AV DevicesPivot Stand Connecting HeadphoneTilt angle Attaching a Base Removing the baseClick Windows ME Driver Windows MEClick Windows XP/2000 Driver Windows XP/2000Microsoft Windows XP Operating System Installing the Monitor Driver ManualPage How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating System Linux Operating SystemNatural Color Software Program How to install the Natural Color software Analog/DigitalPC MagicBright AV/S-Video/Component ModeAuto Available in Analog mode only Play/Stop Source MagicBright ModePIP Available in Analog/DigitalPC Mode Only Analog Digital Video Component Source List Edit NameMagicBright Custom ContrastBrightness Available in Analog Mode Only Coarse Available in PC Mode Only Red Green BlueFine SharpnessPicture AV/S-Video/Component Mode CustomCool2 / Cool1 / Normal / Warm1 / Warm2 Color Tone Size Film ModeAV / S-Video Wide / Zoom1 / Zoom2 Component Wide Sound Select Main Sub Available PIP onSource Size Position OffIf you select , in Size, Position will not be activated Operates only for AV, S-Video and Component mode High Medium Low Opaque Blue Screen ResetImage Reset Available in Analog Mode Only Color ResetOverview Installation Page Installation Problems It is recommended using MagicTune in Windows 2000 or later OSD Mode Color Tab Definition Image Tab Definition Support Tab Definition Color Calibration Press View Uncalibrated button to see the original image Uninstall Troubleshooting Symptom Check List Graphic card, visit our website to check Overview Page Page Installation Problems Interface Page Page Uninstall Page Signal Cable on the screen? When connecting D-sub cableWhen connecting DVI cable Display Settings Question Useful Tips Then contact the Service Center or your dealer General EPA/ENERGY Horizontal Frequency Preset Timing ModesNorth America CIS Dot Pitch ResolutionVertical Frequency Horizontal FrequencyMéxico Class BPage What is Image retention ? WarrantyPower Off, Screen Saver, or Power Save Mode Suggestions for specific applications