Adcom GTP-880 owner manual Satellite Tuner or Television, Video Display

Page 18

(opt 1-3) input jacks on the rear of the GTP-880, depend- ing on the type of connector used by the device. Later, you will configure the GTP-880 to use the specific input that you have chosen.

If your recording device also has a digital input jack, con- nect it to either the coaxial or optical output jack on the rear of the GTP-880, depending on the type of connector used by the device. The signal from the selected input source of the GTP-880 will be sent to the recorder.

Satellite Tuner or Television

Composite: Connect the composite video output from the satellite tuner or television to one of the video input jacks (video 1, 2 or 3) on the rear of the GTP-880 using an RCA-type video cable.

S-video:If there is an s-video output on the satellite tuner or television, connect it to one of the s-video inputs (video 1, 2 or 3) on the rear of the GTP-880 using an s-video cable. S-video delivers a better picture than composite connections and should be used whenever possible unless you can use component connections, which deliver better video than s-video.

Component: If the satellite tuner or television has com- ponent video outputs, connect them to one of the com- ponent video input jacks (DVD, video 1 or video 2) on the rear of the GTP-880 using an appropriate cable set.

Analog Audio: Connect the L and R channel outputs on the satellite tuner or television to the set of audio input jacks (video 1, 2 or 3) directly under the video jack used on the rear of the GTP-880.

Digital Audio: If your satellite tuner or television has a digi- tal output jack, connect it to one of the coaxial (coax 1-3) or optical (opt 1-3) input jacks on the rear of the GTP-880, depending on the type of connector used by the device. Later, you will configure the GTP-880 to use the specific input that you have chosen.

Video Display

A video display device such as a television monitor, fixed- pixel device (plasma or LCD) or video projector can be connected to the GTP-880 using the following methods.

Composite: Connect the composite video input from the display to the composite video main out jack on the rear of the GTP-880 using an RCA-type video cable.

S-video:If there is an s-video input on the display, con- nect it to the s-video main out jack on the rear of the GTP-880 using an s-video cable. S-video delivers a better picture than composite connections and should be used whenever possible unless you can use component connec- tions, which deliver better video than s-video.

Component: If the display has component video inputs, connect them to the monitor component output jacks on the rear of the GTP-880 using an appropriate cable set.

Note: Since the GTP-880 converts composite video to s-video and vice versa, you need only make one of those two types of connections between the GTP-880 and your video display. However, when component video connections are used it is still necessary to make either the composite or s- video connections so that you are able to view the on-screen menus and displays which do not appear on the monitor component output. The GTP-880 does not convert from either composite or s-video to component or vice versa.

18 ADCOM GTP-880 Owner’s Manual

Image 18
Contents Page Welcome Remote Control SetupDescription of Unit Outdoor Antenna Grounding Unpacking the GTP-880 Adcom Protection Plan USA onlyInterface Overview Bass & Treble Adjustments Analog Direct SelectionsTo operate the tuner Volume control Source ButtonsSurround Mode Buttons Surround Format InformationAdditional Information Placement of your GTP-880 AC Input Monitor Component Video Output Input & Output System ConnectionsVideo 2 Component Input 15 AM/FM Antenna InputsRoom 2 Analog Audio Output Composite Video main Output20 12V DC Trigger main/room 23 RS232 Control DB9Connecting Components Main Analog Audio outputsExternal Amplifier DVD PlayerOutput jacks supplied by the GTP-880 are Video Components CD PlayerAudio Recorder Video RecorderSatellite Tuner or Television Video DisplayPage Page Page Connection Diagram Analog Source GTP-880 Tuner PreampConnection Diagram GTP-880 Video Outputs Direct Access Keypad GRC-810 Remote ControlPower Button Main ButtonRemote Features 32 Main Button Volume Up & Down ButtonsOverview of the GRC-810 48 Ch. Trim & FM/AM Button Navigation & Select ButtonsDirect Analog Input Buttons 49 Ch. Cal & Memory ButtonButtons Function CD Function VCR Vunction Video Page Deleting Individual Commands Using Pre Programmed CommandsProgramming Your Own Commands Programming the GRC-810 RemoteDeleting all the Commands for Every Source Component Programming Macro ButtonsDeleting Macro Initiator Buttons Command GTP-880 Function Commandfront GTP-880 Function On Screen Display Setup OverviewInput Configuration To turn the GTP-880 onSpeaker Configuration Speaker PlacementTo configure an input To configure the GTP-880 for your speaker system Channel Configuration Calibration To set the channel levels for you systemTo set channel levels using the test tone function To adjust channel trim from the main menuChannel Trim Delay Configuration To adjust channel trim using the trim functionTo set the speaker distance delays for your speakers To set the sleep timer from the main menu Setting the OSD Time OutSleep Timer To set the front panel display brightnessTo turn on theater compensation using the th-eq button Analog Level Input and Peak IndicatorPro Logic II and NE06 Music Config Theater CompensationRoom Two Configuration To adjust the Plii Music ParametersTo adjust the room two settings To lock a specific surround mode To enable/disable Night Mode compensationDynamic Range Page Installer’s Notes Resolving Problems System ResetSymptom Possible Reason Possible Solution Caring for your GTP-880 ServicingGTP-880 Specification Preamplifier Analog SectionAdcom

GTP-880 specifications

The Adcom GTP-880 is a high-performance home theater preamp and processor that has garnered attention for its impressive features and audio quality. Designed for audiophiles and home theater enthusiasts alike, the GTP-880 stands out due to its versatile functionality and advanced technology.

One of the main features of the Adcom GTP-880 is its multi-channel audio processing capability. Supporting formats such as DTS, Dolby Digital, and several others, this preamp ensures that users experience immersive sound in their home theater systems. This cinematic audio experience is complemented by a well-executed surround sound setup, allowing users to achieve the kind of high-fidelity output traditionally found in professional environments.

The GTP-880 is also equipped with a range of inputs and outputs that enhance its versatility. It includes multiple digital inputs - including coaxial and optical options - alongside standard analog inputs. This extensive connectivity makes it easy to integrate various devices from CD players to gaming consoles, ensuring flexibility in how users configure their systems. Moreover, the inclusion of balanced XLR outputs aids in minimizing noise for clearer sound reproduction.

Technologically, the Adcom GTP-880 employs advanced circuitry designs that contribute to its high-performance audio. The use of high-quality components offers not only durability but also superior sound fidelity. It also features a sophisticated user interface that makes navigating options effortless, including customizing sound settings and adjusting levels.

In terms of build quality, the GTP-880 showcases an elegant design that fits seamlessly into most home entertainment setups. Its sturdy construction ensures reliability and longevity, while the sleek appearance makes it a visually appealing component in any audio setup.

Another notable characteristic is the remote control functionality, which adds convenience for users looking to manage their home theater system from a distance. Additionally, the unit provides multiple setup options, catering to different room acoustics and personal preferences.

In summary, the Adcom GTP-880 is a remarkable preamp and processor, marrying advanced audio processing technologies with excellent build quality and flexibility. Its blend of features allows for an unparalleled audio experience, making it an ideal choice for home theater aficionados seeking to elevate their audio experience. Whether it’s for movies, music, or gaming, the GTP-880 stands as a formidable choice in the landscape of home audio equipment.