Adcom GTP-880 Setting the OSD Time Out, Sleep Timer, To set the front panel display brightness

Page 42

You can scroll in either direction using the and buttons.

7.Press the button when you have made a selection. Repeat steps 6 and 7 for the center and surround speakers.

NOTE: There is no delay function for the subwoofer

8.Press the button until the return to main menu option is selected.

9.Press the menu button to return to the main menu, or press the menu button twice to exit.

3.7System Configuration Setting the Display Brightness

This control sets the front panel display brightness. The default display brightness is set to be easily visible in a normally lit room. If you prefer to dim the display, for example, during movie viewing in a darkened room, you can access the VFD brightness setting from the system configuration menu.

To set the front panel display brightness:

1. Press the menu button to enter the main menu. The

main menu appears on the OSD. The cursor on the OSD should be pointing to the input configuration menu and input config appears on the front panel display.

2.Press the button until system configuration is selected. The cursor on the OSD should be pointing to the system configuration menu and system config appears on the front panel display.

3.Press the select button to enter the system configuration menu. The system configuration menu appears on the OSD. Display bright is selected.

5.Use the and buttons to choose between full and half.

6.After making your selection, exit the main menu. The dim button can also be used on the remote control.

Setting the OSD Time Out

This menu is used to set how long the on screen display will remain visible after a button is pushed or setting is changed on the GTP-880.

To set the on screen display time out:

1.Press the menu button to enter the main menu. The main menu appears on the OSD. The cursor on the OSD should be pointing to the input configuration menu.

2.Press the button until system configuration is selected. The cursor on the OSD should be pointing to the system configuration menu and system config appears on the front panel display.

3.Press the select button to enter the system configuration menu. The system configuration menu appears on the front panel display and the OSD.

4.Press the button until the OSD time out menu is selected.

5.Use the < and > buttons to cycle through the available options. The following times appear as you scroll through them: 30 sec, 25 sec, 20 sec, 15 sec, 10 sec, 5 sec, 0 sec

Note: Setting the time out to 0 sec. disables the OSD status.

6.After making your selection, press the button twice to exit the main menu.

Sleep Timer

This option allows you set how long the unit will remain on before automatically shutting off. This mode can be accessed using the sleep button on the remote control, or from system configuration menu.

To set the sleep timer from the main menu:

1.Press the menu button to enter the main menu. The main menu appears on the front panel display and the OSD. The cursor on the OSD should be pointing to the input configuration menu andinput config appears on the display.

2.Press the button until system configuration is selected. The cursor on the OSD should be pointing to the system configuration menu and system config appears on the front panel display.

3.Press the select button to enter the system configuration menu. The system configuration menu appears on the front panel display and the OSD.

4.Press the button until the sleep time set menu is selected.

5.Use the and buttons to cycle through the available

42 ADCOM GTP-880 Owner’s Manual

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Page Welcome Remote Control SetupDescription of Unit Outdoor Antenna Grounding Unpacking the GTP-880 Adcom Protection Plan USA onlyInterface Overview Bass & Treble Adjustments Analog Direct SelectionsTo operate the tuner Volume control Source ButtonsSurround Mode Buttons Surround Format InformationAdditional Information Placement of your GTP-880 AC Input Monitor Component Video Output Input & Output System ConnectionsVideo 2 Component Input 15 AM/FM Antenna InputsRoom 2 Analog Audio Output Composite Video main Output20 12V DC Trigger main/room 23 RS232 Control DB9Connecting Components Main Analog Audio outputsExternal Amplifier DVD PlayerOutput jacks supplied by the GTP-880 are Video Components CD PlayerAudio Recorder Video RecorderSatellite Tuner or Television Video DisplayPage Page Page Connection Diagram Analog Source GTP-880 Tuner PreampConnection Diagram GTP-880 Video Outputs Direct Access Keypad GRC-810 Remote ControlPower Button Main ButtonRemote Features 32 Main Button Volume Up & Down ButtonsOverview of the GRC-810 48 Ch. Trim & FM/AM Button Navigation & Select ButtonsDirect Analog Input Buttons 49 Ch. Cal & Memory ButtonButtons Function CD Function VCR Vunction Video Page Deleting Individual Commands Using Pre Programmed CommandsProgramming Your Own Commands Programming the GRC-810 RemoteDeleting all the Commands for Every Source Component Programming Macro ButtonsDeleting Macro Initiator Buttons Command GTP-880 Function Commandfront GTP-880 Function On Screen Display Setup OverviewInput Configuration To turn the GTP-880 onSpeaker Configuration Speaker PlacementTo configure an input To configure the GTP-880 for your speaker system Channel Configuration Calibration To set the channel levels for you systemTo set channel levels using the test tone function To adjust channel trim from the main menuChannel Trim Delay Configuration To adjust channel trim using the trim functionTo set the speaker distance delays for your speakers To set the sleep timer from the main menu Setting the OSD Time OutSleep Timer To set the front panel display brightnessTo turn on theater compensation using the th-eq button Analog Level Input and Peak IndicatorPro Logic II and NE06 Music Config Theater CompensationRoom Two Configuration To adjust the Plii Music ParametersTo adjust the room two settings To lock a specific surround mode To enable/disable Night Mode compensationDynamic Range Page Installer’s Notes Resolving Problems System ResetSymptom Possible Reason Possible Solution Caring for your GTP-880 ServicingGTP-880 Specification Preamplifier Analog SectionAdcom

GTP-880 specifications

The Adcom GTP-880 is a high-performance home theater preamp and processor that has garnered attention for its impressive features and audio quality. Designed for audiophiles and home theater enthusiasts alike, the GTP-880 stands out due to its versatile functionality and advanced technology.

One of the main features of the Adcom GTP-880 is its multi-channel audio processing capability. Supporting formats such as DTS, Dolby Digital, and several others, this preamp ensures that users experience immersive sound in their home theater systems. This cinematic audio experience is complemented by a well-executed surround sound setup, allowing users to achieve the kind of high-fidelity output traditionally found in professional environments.

The GTP-880 is also equipped with a range of inputs and outputs that enhance its versatility. It includes multiple digital inputs - including coaxial and optical options - alongside standard analog inputs. This extensive connectivity makes it easy to integrate various devices from CD players to gaming consoles, ensuring flexibility in how users configure their systems. Moreover, the inclusion of balanced XLR outputs aids in minimizing noise for clearer sound reproduction.

Technologically, the Adcom GTP-880 employs advanced circuitry designs that contribute to its high-performance audio. The use of high-quality components offers not only durability but also superior sound fidelity. It also features a sophisticated user interface that makes navigating options effortless, including customizing sound settings and adjusting levels.

In terms of build quality, the GTP-880 showcases an elegant design that fits seamlessly into most home entertainment setups. Its sturdy construction ensures reliability and longevity, while the sleek appearance makes it a visually appealing component in any audio setup.

Another notable characteristic is the remote control functionality, which adds convenience for users looking to manage their home theater system from a distance. Additionally, the unit provides multiple setup options, catering to different room acoustics and personal preferences.

In summary, the Adcom GTP-880 is a remarkable preamp and processor, marrying advanced audio processing technologies with excellent build quality and flexibility. Its blend of features allows for an unparalleled audio experience, making it an ideal choice for home theater aficionados seeking to elevate their audio experience. Whether it’s for movies, music, or gaming, the GTP-880 stands as a formidable choice in the landscape of home audio equipment.
Top Page Image Contents