Adcom GTP-870HD user manual Volume/Tone Configuration, Tone Control, Bass Level, Treble Level

Chapter 3 - Setup

Volume/Tone Configuration

Want to adjust the bass, treble, and relative volume for each input source? Look no further than the Vol- ume/Tone Configuration menu.

To access the Volume/Tone Configuration menu:

1Press the Main button on the remote control.

2 Press the Setup button.

3 Use the / buttons to select INPUT CONFIG, then press the Select button.

4 Use the / buttons to select VOLUME/TONE, then press the Select button.

5 Use the / buttons to choose from the follow- ing menu items:

VOLUME

Sets the relative volume of the selected input. Use this feature to balance volume levels as you switch between inputs. Use the / buttons to set the vol- ume level:

•The available range is -80 dB to +18 dB.

•The default setting is -40 dB.

TONE CONTROL

Enables manual bass and treble control. Use the / buttons to choose:

•On or Off.

•Select On to use your custom bass and treble settings for the selected input.

•Select Off to use the default bass and treble set- tings for the selected input.

BASS LEVEL

Provides manual control of the bass level for the se- lected input. Use the / buttons as follows:

•The available range is -12 dB to +12 dB.

•The default setting is +0 dB.

TREBLE LEVEL

Provides manual control of the treble level for the selected input. Use the / buttons as follows:

•The available range is -12 dB to +12 dB.

•The default setting is +0 dB.

Notes:

• To make Bass/Treble adjustments ‘on the fly,’ first press the Bypass button on the remote con- trol to toggle Tone Control on. Then use the Bass and Treble buttons to bring up the tone adjust- ment on-screen display. Finally, use the / buttons to set the desired level.

• Tone controls are not available in the Dolby Digital EX, DTS-ES, NEO6, and Pro Logic IIx Sur- round modes.

36GTP-870HD Owner’s Manual