Adcom GTP-870HD user manual Room 2 Operations, Activating the Room 2 Output

Chapter 4 - Operations

Room 2 Operations

The Room 2 feature makes the GTP-870HD a true multi-tasking device. For example, you can watch a movie in one room and play a CD in another at the touch of a button.

To use the Room 2 feature, you must have:

•An amplifier or receiver connected to the Zone 2 Outputs; see page 28.

•A Room 2 input source specified in the Setup menu; see page 41.

Activating the Room 2 Output

To activate the Room 2 output:

1Power on the GTP-870HD.

2 Select the Room 2 output.

•Press the Rm 2 button on the remote control. or

•Press the Room 2 On/Off button on the front panel.

3Power on your Room 2 component.

•Note: The Room 2 component will power on automatically if you connected it to the Zone 2 12V DC trigger.

4Adjust the volume.

•If you used the Variable Zone 2 outputs, use the Volume knob on the GTP-870HD.

•If you used the Fixed Zone 2 outputs, use the volume control on your Room 2 component.

Notes:

•The GTP-870HD can be in Standby or On modes for Room Two operation.

Overriding Default Room 2 Settings

You can change the Room 2 input, volume, and mute settings from the front panel without going through the main Setup menu:

1Select the Room 2 Config menu.

•Press the Room 2 Setup button on the front panel.

2Make changes to Room 2 settings.

•Press the Room 2 Setup button repeatedly to step through each menu item.

•Use the front panel Volume Knob or Up/Down buttons to select menu options.

3Menu options include:

•Room 2 (On/Off)

•Mute (On/Off)

•Input (Video 2~4, CD, Tuner AM/FM)

•Volume level (-65 dB to 0 dB)

62GTP-870HD Owner’s Manual