7Setup and Reset
7.1.3USB Connection
You can view the USB cable connection status between the product and a PC.
z
z
The connection status will be shown even when the input source is not USB mode.
Selecting USB Connection when a USB cable is connected will automatically change the input source to USB mode.
Configuring USB Connection
1Press [MENU] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that a USB cable is connected or disconnected.
4 If a USB cable is connected, press [ | ] to move to USB Connection and press [ |
| ]. The input |
| |||
source will automatically switch to USB mode. |
|
|
+8%
$XWR:LUHOHVV'HWHFWLRQ :LUHOHVV&RQQHFWLRQ 86%&RQQHFWLRQ
$QDORJ +'0,
86%6XSHU&KDUJLQJ :LUHOHVV,'
2II
'LVFRQQHFWHG
&RQQHFWHG
'LVFRQQHFWHG
'LVFRQQHFWHG
2II
AUTO
7 Setup and Reset 76