7Setup and Reset
7.1.6USB Super Charging
A source device's battery can be charged quickly via USB 3.0 port on the product.
z
z
z
Data transmission is not available if USB Super Charging is on.
To enable standard charging or data transmission, set USB Super Charging to off. The input source does not need to be changed.
Configuring USB Super Charging
1Press [MENU] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to HUB and press [ ] on the product.
4Press [ ] to move to USB Super Charging and press [] on the product. The following screen will appear.
HUB |
|
| ||||
| Auto Wireless Detection | : | 2II | |||
| Wireless Connection | : | 'LVFRQQHFWHG | |||
| USB Connection | : | 'LVFRQQHFWHG | |||
|
|
|
|
| : | 'LVFRQQHFWHG |
|
|
| Analog | |||
| HDMI | : 'LVFRQQHFWHG | ||||
| USB Super Charging | : 2II | ||||
| Wireless ID | : | 1SRUW | |||
| 2SRUWV |
AUTO
zOff: Deactivate USB Super Charging
z1 Port: Enable a single USB 3.0 port (marked with a charging icon) for quick battery charging.
Only the USB 3.0 port marked [] supports
5
6
z2 Ports: Enable two USB 3.0 ports for quick battery charging.
Press [ | ] to move to the option you want and press the [ |
| ]. |
|
The selected option will be applied.
7.1.7Wireless ID
Wireless ID is a unique ID assigned to a monitor. The "Samsung Central Station Setup" program reads the ID and identifies each of nearby monitors. The ID is shown in the "Samsung Central Station Setup" program and in the lower part of the HUB menu.
7 Setup and Reset 79