Samsung PX2370 user manual Setup&Reset, Menu, Description, functions of the PC

Page 30
 SETUP&RESET

functions of the PC. SETUP&RESET

MENU

DESCRIPTION

 

 

Reset

Use this function to restore the visual quality and color settings to the factory defaults.

 

• <No> - <Yes>

 

 

Language

Select a language for the OSD.

 

The selected language is only applied to the product OSD. This setting does not affect the other

 

functions of the PC.

 

 

MagicLux

Automatically detects the surrounding light intensity so that the display brightness can be adjusted

 

appropriately.

 

• <Sensor Off> - <Sensitivity-Low> - <Sensitivity-Middle> - <Sensitivity-High>

 

• If <MagicBright> is set to <Dynamic Contrast> mode, the <MagicLux> function is disabled.

 

• If <MagicEco> is set to <Power Saving Off> mode, the <MagicLux> function is enabled.

 

• If the surrounding light intensity is 400 lux or greater, the display brightness is set to maximum.

 

 

 

Only works in Windows 7 and recommended when using multiple monitors.

 

• <Off> - When <Off> is selected, the <MagicReturn> function is turned off.

 

• <On> - When <On> is selected, the <MagicReturn> function is turned on.

 

• This function does not support Analog mode.

 

• This function is only available for digital signal in dual model.

MagicReturn

• This function is not available in Windows2000/XP/Vista system. It is suggested to select

 

<Off>.

 

• When the <Check Signal Cable> OSD is shown,user can keep pressing the Down Key for 5

 

seconds, then <MagicReturn> is set to Off automatically.

 

• The <MagicReturn> function may not work properly with graphics cards that are not fully

 

compliant with DVI specifications.If this is the case, please contact the appropriate graphics

 

card manufacturer or set the <MagicReturn> function to <Off>.

3-5

Using the product

Image 30
Contents SyncMaster PX2370 LCD MonitorUser Manual without prior notice to improve the performanceINSTALLING THE PRODUCT Table Of ContentsMAJOR SAFETY PRECAUTIONS USING THE PRODUCT1-1 Before You Start 1 Major Safety PrecautionsUsing this Manual Icons used in this manualSecuring the Installation Space 1-2 Custody and MaintenanceExternal Surface and Screen Maintenance The appearance and the color may differ depending on the modelPower Related 1-3 Safety PrecautionsIcons used for safety precautions Meaning of SignsInstallation Related to electric shockfire Cleaning Related Otherwise, this may cause the product toUsage Related coming offIf you do not use the product for a long time Maintaining the Correct Posture when Using this Product CONTENTS 2 Installing the Product2-1 Package Contents The cleaning cloth is supplied with black high-glossy models only2-2 Installing the Stand Disassembly is the reverse order of assembly After fixing the stand, turn the monitor over as shown in the pictureAvoid lifting the product holding only the stand 2-3 Connecting with a PC The connecting part may differ depending on the product modelChange the mode by selecting MENU → SETUP&RESET → PC/AV Mode → PC HDMI by pressing the button 2-4 Connecting an AV Device Press the button and select HDMI as an input signalDIGITAL 2-5 Connecting to an AmplifierIf no sound is emitted from the monitor, you need to use an amplifier AUDIO OUT2-6 Kensington Lock Locking the productTo set the resolution to the optimal resolution 3 Using the product3-1 Setting the Optimal Resolution In the Settings tab, set the resolution to the optimal resolutionHORIZONTAL 3-2 Standard Signal Mode TableDISPLAY MODE VERTICAL3-3 Installing the Device Driver and contrast and can set up the adjustment function assigned to the 3-4 Product Operating ButtonsProduct Operating Buttons DESCRIPTIONcord is recommended to minimize power consumption This function is only available in Analog modePlease refer to the MagicLux function in the OSD menu Only supported when MagicEco is set to Power Saving off 3-5 Using the Screen Adjustment Menu OSD On Screen DisplayPICTURE Only supported when MagicLux is set to Sensor OFFWhen PC/AV Mode is set as AV When connecting to digital output device via DVI/HDMI cableWhen signal resolution is 480p, 576p , 720p, 1080i, 1080p modeSet to Off when viewing directly in front of the screen This menu is not available when MagicColor or Color Effect is setCOLOR HDMI and the input signal is HDMI RGB444This menu is unavailable when MagicAngle is set This menu is unavailable when MagicColor is setAV and image size is set as Screen Fit SIZE & POSITIONA signal not in the standard mode table is not supported Requirements to activate Image Sizefunctions of the PC SETUP&RESETThis function is only available for digital signal in dual model This function does not support Analog modeINFORMATION 4 Installing the Software What is Natural Color ?4-1 Natural Color Restrictions and Problems with the Installation MagicTune What is MagicTune?Installing the Software 4-2 MagicTune2. Double-click the Add or Remove Programs icon in the Control Panel What is MultiScreen ? Restrictions and Problems with the Installation MultiScreen4-3 MultiScreen 5 Troubleshooting 5-1 Monitor Self-DiagnosisA BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON 5-2 Before Requesting ServiceTHE ON SCREEN ADJUSTMENT MENU OSD DOES NOT APPEAR THE IMAGE IS TOO LIGHT OR TOO DARKA “BEEP, BEEP” SOUND IS HEARD WHEN BOOTING THE COMPUTER GRAPHICS CARDPLEASE TRY THE FOLLOWING Design and specifications are subject to change without prior notice SpecificationsMore Information MODEL NAMEPOWER OFF 6-2 Power Saving FunctionPOWER SAVING MODE STATELATIN AMERICA 6-3 Contact SAMSUNG WORLDWIDENORTH AMERICA EUROPEASIA PACIFIC MIDDLE EAST & AFRICA More Information6-4 Correct Disposal of This Product Waste Electrical & Electronic Equipment - Europe only