Samsung PX2370 user manual Cleaning Related, Otherwise, this may cause the product to

Page 7
• Otherwise, this may cause the product to

Cleaning Related Caution

Do not let the product drop while moving it.

• This may result in a problem with the product or injury.

!

When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf.

• Otherwise, this may cause the product to

!

 

fall off and result in a malfunction or injury.

 

Make sure to use a cabinet or shelf suitable to the size of the product.

 

If the product is installed in a location where the

 

operating conditions vary considerably, a

SAMSUNG

serious quality problem may occur due to the

!

surrounding environment. In this case, install

the product only after consulting one of our

 

 

service engineers about the matter.

Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, such as airports or stations where the product is continuously used for a long time and so on.

Do not place the product face down on the floor.

This may damage the panel of the product.

When putting the product down, handle it gently.

Otherwise, it may result in a problem with the product or injury.

Cleaning Related

Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use the recom- mended cleansing agent only.

You can purchase the recommended cleansing agent from a service center.

Before cleaning the product, unplug the power cord.

• Otherwise, it may result in electric shock or

!fire.

When cleaning the product, do not spray water directly over the product parts.

Make sure that water does not enter the product.

Otherwise, it may result in fire, electric shock or a problem with the product.

Major Safety Precautions

1-3

Image 7
Contents without prior notice to improve the performance LCD MonitorUser Manual SyncMaster PX2370USING THE PRODUCT Table Of ContentsMAJOR SAFETY PRECAUTIONS INSTALLING THE PRODUCTIcons used in this manual 1 Major Safety PrecautionsUsing this Manual 1-1 Before You StartThe appearance and the color may differ depending on the model 1-2 Custody and MaintenanceExternal Surface and Screen Maintenance Securing the Installation SpaceMeaning of Signs 1-3 Safety PrecautionsIcons used for safety precautions Power Relatedto electric shock Installation Relatedfire Otherwise, this may cause the product to Cleaning Relatedcoming off Usage RelatedIf you do not use the product for a long time Maintaining the Correct Posture when Using this Product The cleaning cloth is supplied with black high-glossy models only 2 Installing the Product2-1 Package Contents CONTENTS2-2 Installing the Stand After fixing the stand, turn the monitor over as shown in the picture Disassembly is the reverse order of assemblyAvoid lifting the product holding only the stand The connecting part may differ depending on the product model 2-3 Connecting with a PCChange the mode by selecting MENU → SETUP&RESET → PC/AV Mode → PC HDMI by pressing the button Press the button and select HDMI as an input signal 2-4 Connecting an AV DeviceAUDIO OUT 2-5 Connecting to an AmplifierIf no sound is emitted from the monitor, you need to use an amplifier DIGITALLocking the product 2-6 Kensington LockIn the Settings tab, set the resolution to the optimal resolution 3 Using the product3-1 Setting the Optimal Resolution To set the resolution to the optimal resolutionVERTICAL 3-2 Standard Signal Mode TableDISPLAY MODE HORIZONTAL3-3 Installing the Device Driver DESCRIPTION 3-4 Product Operating ButtonsProduct Operating Buttons and contrast and can set up the adjustment function assigned to theThis function is only available in Analog mode cord is recommended to minimize power consumptionPlease refer to the MagicLux function in the OSD menu Only supported when MagicLux is set to Sensor OFF 3-5 Using the Screen Adjustment Menu OSD On Screen DisplayPICTURE Only supported when MagicEco is set to Power Saving offmode When connecting to digital output device via DVI/HDMI cableWhen signal resolution is 480p, 576p , 720p, 1080i, 1080p When PC/AV Mode is set as AVThis menu is not available when MagicColor or Color Effect is set Set to Off when viewing directly in front of the screenHDMI and the input signal is HDMI RGB444 COLORThis menu is unavailable when MagicColor is set This menu is unavailable when MagicAngle is setRequirements to activate Image Size SIZE & POSITIONA signal not in the standard mode table is not supported AV and image size is set as Screen FitThis function does not support Analog mode SETUP&RESETThis function is only available for digital signal in dual model functions of the PCINFORMATION What is Natural Color ? 4 Installing the Software4-1 Natural Color 4-2 MagicTune What is MagicTune?Installing the Software Restrictions and Problems with the Installation MagicTune2. Double-click the Add or Remove Programs icon in the Control Panel Restrictions and Problems with the Installation MultiScreen What is MultiScreen ?4-3 MultiScreen 5-1 Monitor Self-Diagnosis 5 TroubleshootingTHE IMAGE IS TOO LIGHT OR TOO DARK 5-2 Before Requesting ServiceTHE ON SCREEN ADJUSTMENT MENU OSD DOES NOT APPEAR A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ONGRAPHICS CARD A “BEEP, BEEP” SOUND IS HEARD WHEN BOOTING THE COMPUTERPLEASE TRY THE FOLLOWING MODEL NAME SpecificationsMore Information Design and specifications are subject to change without prior noticeSTATE 6-2 Power Saving FunctionPOWER SAVING MODE POWER OFFEUROPE 6-3 Contact SAMSUNG WORLDWIDENORTH AMERICA LATIN AMERICAASIA PACIFIC More Information MIDDLE EAST & AFRICAWaste Electrical & Electronic Equipment - Europe only 6-4 Correct Disposal of This Product