Samsung PX2370 user manual Installation Related, to electric shock, fire

Page 6
to electric shock.

fire. Caution

Avoid unplugging the power plug while the product is operating.

• Otherwise, it may damage the product due

to electric shock.

!

 

When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord.

!

• Otherwise, it may result in electric shock or

!

 

 

 

fire.

 

Installation Related

Installation Related Warning

Avoid placing burning candles, mosquito- repellent or cigarettes on the product and installing the product near a heater.

• Otherwise, it may result in fire.

Avoid installing the product in a badly-ventilated

 

location such as inside a bookshelf or closet.

 

• Otherwise, it may result in fire due to

 

internal over-heating.

!

 

Keep the plastic bags used to pack the product

 

away from children.

 

• If children place the plastic bags over their

 

!

heads, they may suffocate.

 

 

Avoid installing the product in a location

 

exposed to dust, moisture (sauna), oil, smoke

 

or water (rain drops) and installing it within a

!

vehicle.

 

This may result in electric shock or fire.

Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another electric appliance.

Otherwise, it may result in electric shock or fire.

Connect the power plug to a wall outlet that can be easily reached.

When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product.

Avoid installing the product at an easily reachable height where children may reach it.

If a child touches the product, the product may fall and this may result in injury.

Since the front part is heavier, install the product on a flat and stable surface.

Keep a distance of at least 10 cm from the wall when installing the product for ventilation.

Otherwise, it may result in fire due to internal over-heating.

Avoid installing the product in a location that is unstable or exposed to excessive vibrations such as on an unstable or slanted shelf.

The product may fall and this may result in damage to the product or injury.

If you use the product in a location exposed to excessive vibrations, it may result in a problem with the product or fire.

Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fire or heater.

This may shorten the product life cycle or cause fire.

1-3

Major Safety Precautions

Image 6
Contents SyncMaster PX2370 LCD MonitorUser Manual without prior notice to improve the performanceINSTALLING THE PRODUCT Table Of ContentsMAJOR SAFETY PRECAUTIONS USING THE PRODUCT1-1 Before You Start 1 Major Safety PrecautionsUsing this Manual Icons used in this manualSecuring the Installation Space 1-2 Custody and MaintenanceExternal Surface and Screen Maintenance The appearance and the color may differ depending on the modelPower Related 1-3 Safety PrecautionsIcons used for safety precautions Meaning of SignsInstallation Related to electric shockfire Cleaning Related Otherwise, this may cause the product toUsage Related coming offIf you do not use the product for a long time Maintaining the Correct Posture when Using this Product CONTENTS 2 Installing the Product2-1 Package Contents The cleaning cloth is supplied with black high-glossy models only2-2 Installing the Stand Disassembly is the reverse order of assembly After fixing the stand, turn the monitor over as shown in the pictureAvoid lifting the product holding only the stand 2-3 Connecting with a PC The connecting part may differ depending on the product modelChange the mode by selecting MENU → SETUP&RESET → PC/AV Mode → PC HDMI by pressing the button 2-4 Connecting an AV Device Press the button and select HDMI as an input signalDIGITAL 2-5 Connecting to an AmplifierIf no sound is emitted from the monitor, you need to use an amplifier AUDIO OUT2-6 Kensington Lock Locking the productTo set the resolution to the optimal resolution 3 Using the product3-1 Setting the Optimal Resolution In the Settings tab, set the resolution to the optimal resolutionHORIZONTAL 3-2 Standard Signal Mode TableDISPLAY MODE VERTICAL3-3 Installing the Device Driver and contrast and can set up the adjustment function assigned to the 3-4 Product Operating ButtonsProduct Operating Buttons DESCRIPTIONcord is recommended to minimize power consumption This function is only available in Analog modePlease refer to the MagicLux function in the OSD menu Only supported when MagicEco is set to Power Saving off 3-5 Using the Screen Adjustment Menu OSD On Screen DisplayPICTURE Only supported when MagicLux is set to Sensor OFFWhen PC/AV Mode is set as AV When connecting to digital output device via DVI/HDMI cableWhen signal resolution is 480p, 576p , 720p, 1080i, 1080p modeSet to Off when viewing directly in front of the screen This menu is not available when MagicColor or Color Effect is setCOLOR HDMI and the input signal is HDMI RGB444This menu is unavailable when MagicAngle is set This menu is unavailable when MagicColor is setAV and image size is set as Screen Fit SIZE & POSITIONA signal not in the standard mode table is not supported Requirements to activate Image Sizefunctions of the PC SETUP&RESETThis function is only available for digital signal in dual model This function does not support Analog modeINFORMATION 4 Installing the Software What is Natural Color ?4-1 Natural Color Restrictions and Problems with the Installation MagicTune What is MagicTune?Installing the Software 4-2 MagicTune2. Double-click the Add or Remove Programs icon in the Control Panel What is MultiScreen ? Restrictions and Problems with the Installation MultiScreen4-3 MultiScreen 5 Troubleshooting 5-1 Monitor Self-DiagnosisA BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON 5-2 Before Requesting ServiceTHE ON SCREEN ADJUSTMENT MENU OSD DOES NOT APPEAR THE IMAGE IS TOO LIGHT OR TOO DARKA “BEEP, BEEP” SOUND IS HEARD WHEN BOOTING THE COMPUTER GRAPHICS CARDPLEASE TRY THE FOLLOWING Design and specifications are subject to change without prior notice SpecificationsMore Information MODEL NAMEPOWER OFF 6-2 Power Saving FunctionPOWER SAVING MODE STATELATIN AMERICA 6-3 Contact SAMSUNG WORLDWIDENORTH AMERICA EUROPEASIA PACIFIC MIDDLE EAST & AFRICA More Information6-4 Correct Disposal of This Product Waste Electrical & Electronic Equipment - Europe only