Samsung 180T Maintenance of Your LCD Monitor, Attaching an Arm-Type Stand or Wall Mount Hanger

Page 25

Attaching an Arm-Type Stand or Wall Mount Hanger

Appendix

Attaching an Arm-Type Stand or Wall Mount Hanger

NOTE: This monitor accepts a 100mm x 100mm VESA-compliant mounting interface pad.

Rear cover

Mounting

Interface Pad

1	Align the Mounting Interface Pad with the holes in the Rear Cover and secure it with
	the four screws that came with the Arm-type Stand or Wall Mount Hanger.

Maintenance of Your LCD Monitor

WARNING: To avoid risk of electric shock, do not disassemble the monitor cabinet (except gaining access to the cable connectors as described on page 6). Users cannot service the monitor. User maintenance is restricted to cleaning as explained below:

Unplug the monitor from the power outlet before cleaning.

■To clean your LCD Monitor screen, lightly dampen a soft, clean cloth with water or mild detergent. If possible, use a special screen cleaning tissue or solution suitable for the antistatic coating.

■To clean the monitor cabinet, use a cloth lightly dampened with a mild detergent.

■Never use ﬂammable cleaning material to clean your LCD Monitor or any other electrical apparatus.

English 23

Italiano Portuguese Deutsch Español Français English

Image 25

Contents TFT-LCD Monitor SyncMaster 180TDual InterfaceAnalog/Digital Owner’s InstructionsPage Portuguese Italiano Español Deutsch Français English Table of ContentsAuto Adjustment BrightnessDO NOT OPEN Italiano Portuguese Deutsch Español Français English Unpacking Your LCD MonitorWarranty Card DC-AdapterSetting up an Ergonomic Workstation Setting up your LCD MonitorKensington Security Slot Monitor locationEnglish Connecting Your LCD MonitorItaliano Portuguese Deutsch Español Français Figure 3. Cable connections AnalogSetting up your LCD Monitor Push the AUTO button to open the Auto Adjustment OSD Auto AdjustmentGetting Help Plug and PlayTurn off both your computer and the monitor Self-Test Feature Check STFCUnplug the video cable from the back of the computer Turn on the monitorPortuguese Deutsch Español Français English Adjusting Your LCD MonitorItaliano User ControlsAutomatic Save Direct-Access FeaturesBrightness Push the “+” button to increase theFrançais Auto AdjustmentItaliano Portuguese Deutsch Español OSD Lock/UnlockOn Screen Display OSD Accessing the Menu SystemFigure 7. On Screen Display OSD Setting slidebarclosely adjust your monitor to your preference Table 1. Menu Adjustmentsunstable and jitters or shimmers Fine againfactory settings Table 1. Menu Adjustments Continuedand changes the Image Size to Expand or Svenskathe addressability up to 1280 x software you are usingsee more detail recognizeAppendix PowerSaverTroubleshooting White does not look white Table 3. Troubleshooting problems Continuedsized properly onceSpeciﬁcations Referring to Preset timing modes, see pageTable 4. Speciﬁcations Green Pin AssignmentsGND DDC Return H-SyncDisplay Modes Changing the Stand Turn off your monitor and unplug its power cordRemoving the Stand screenAttaching an Arm-Type Stand or Wall Mount Hanger Maintenance of Your LCD MonitorIndex FCC Information Regulatory InformationIC Compliance Notice MPR II ComplianceU.S.A