Samsung 180T manual Setting up your LCD Monitor

Page 8

Setting up your LCD Monitor

(b)

(a)

Figure 4. Cable connections (Digital)

(1)

1	Turn off your computer and unplug its power cord.

2	Connect the signal cable to the DVI-D connector (1) on the back of your monitor.
	Connect the other end of the cable to the video port on the back of your workstation.
3	Connect the power cord for your monitor to the power port on the power adapter.

Secure the power adapter cord and the signal cable(s) under the metal prong.

Insert the tab on each side of the hinge cover (b) then attach the stand of the monitor.

Plug the power cords of your computer and your monitor into a nearby outlet.

7	Turn on your computer and monitor. If your monitor displays an image, installation is
	complete.
8	Perform the auto adjustment procedure as described in “Auto Adjustment” on page 7.

English 6

Image 8

Contents SyncMaster 180T TFT-LCD MonitorDual InterfaceAnalog/Digital Owner’s InstructionsPage Table of Contents Portuguese Italiano Español Deutsch Français EnglishAuto Adjustment BrightnessDO NOT OPEN Unpacking Your LCD Monitor Italiano Portuguese Deutsch Español Français EnglishWarranty Card DC-AdapterSetting up your LCD Monitor Setting up an Ergonomic WorkstationKensington Security Slot Monitor locationConnecting Your LCD Monitor EnglishItaliano Portuguese Deutsch Español Français Figure 3. Cable connections AnalogSetting up your LCD Monitor Auto Adjustment Push the AUTO button to open the Auto Adjustment OSDGetting Help Plug and PlaySelf-Test Feature Check STFC Turn off both your computer and the monitorUnplug the video cable from the back of the computer Turn on the monitorAdjusting Your LCD Monitor Portuguese Deutsch Español Français EnglishItaliano User ControlsDirect-Access Features Automatic SaveBrightness Push the “+” button to increase theAuto Adjustment FrançaisItaliano Portuguese Deutsch Español OSD Lock/UnlockAccessing the Menu System On Screen Display OSDFigure 7. On Screen Display OSD Setting slidebarTable 1. Menu Adjustments closely adjust your monitor to your preferenceunstable and jitters or shimmers Fine againTable 1. Menu Adjustments Continued factory settingsand changes the Image Size to Expand or Svenskasoftware you are using the addressability up to 1280 xsee more detail recognizePowerSaver AppendixTroubleshooting Table 3. Troubleshooting problems Continued White does not look whitesized properly onceTable 4. Speciﬁcations Referring to Preset timing modes, see pageSpeciﬁcations Pin Assignments GreenGND DDC Return H-SyncDisplay Modes Turn off your monitor and unplug its power cord Changing the StandRemoving the Stand screenMaintenance of Your LCD Monitor Attaching an Arm-Type Stand or Wall Mount HangerIndex Regulatory Information FCC InformationIC Compliance Notice MPR II ComplianceU.S.A