Menu
Degauss
Recall
Video Input Level
Sync. Input Type
D-SUB/BNC
DescriptionPlay/Stop
The Degauss feature will remove color impurities caused by magnetic fields.
Do not use the Degauss feature more than once within a 30- minute period.
Note: The monitor may buzz momentarily, the image colors may change and the image will jiggle for a few seconds. These effects are normal.
Use the recall feature to reset these monitor settings to their original levels: Position, Size, Parallelogram, Rotation, Pincushion, Trapezoid, Pinbalance, Clear Moire.
Note: If you have selected "Yes", all settings listed above will be reset. All other settings will remain the same.
Some video cards use video signals higher than 1.0V which causes the display to be very bright.
For those video cards, use this feature to select the 1.0 V Level.
Use this menu to set your monitor to the correct type of synchronization. Select 'Separate' if the computer is sending a separate synchronization signal. Select 'Sync. on Green' if the computer expects the monitor to synchronize with the green signal it sends. Refer to your computer or video card user's manual to determine the correct setting.
Use this menu to choose between the signal source connected to the BNC connector input and the signal source connected to the