IBM 220 manual Features and specifications

Features and specifications

Table 1 provides a summary of the features and specifications of your xSeries 220 server.

Microprocessor:

•Intel® Pentium® III microprocessor with MMX™ technology and SIMD extensions

•256 KB* ECC, level-2 cache (min.)

•133 MHz front-side bus (FSB)

•Support for up to two microprocessors

Memory:

•Standard: 128 MB*

•Maximum: 4 GB*

•Type: 133 MHz, ECC, SDRAM, registered DIMMs

•Slots: 4 dual in-line

Drives standard:

•Diskette: 1.44 MB

•CD-ROM: 48X IDE

•Supports hot-swap SCSI hard disk drives (some models)

Expansion bays:

•Two 5.25-in. bays (one CD-ROM drive installed)

•Two 3.5-in. bays (one diskette drive installed)

•Three 3.5-in. slim bays available in drive cage (some models have a hard disk drive installed)

PCI expansion slots:

•Three 33 MHz/64-bit

•Two 33 MHz/32-bit

Power supply:

One 330 watt autosensing (115-230 V ac)

Video:

•S3 video controller (integrated on system board)

•Compatible with SVGA and

VGA

•8 MB SDRAM video memory

Size:

•Height: 470 mm (18.5 in.)

•Depth: 508 mm (20 in.)

•Width: 165 mm (6.5 in.)

•Weight: approximately 19.5 Kg (43 lb.) when fully configured or 15.9 Kg (35 lb.) minimum

Integrated functions:

•Ultra160 SCSI low voltage differential (LVD) controller

•One 10BASE-T/100BASE-TX Intel Ethernet controller on the system board

•Two serial ports

•Parallel port

•Two Universal Serial Bus (USB) ports

•Keyboard port

•Mouse port

•IDE controller port

•Video port

Acoustical noise emissions:

•Sound power, idling: 5.1 bel maximum

•Sound power, operating: 5.3 bel maximum

Environment:

•Air temperature:

—Server on: 10° to 35° C (50.0°

to 95.0° F). Altitude: 0 to 914 m (2998.7 ft)

—Server on: 10° to 32° C (50.0°

to 89.6° F). Altitude: 914 m (2998.7 ft) to 2133 m (6998.0 ft)

—Server off: 10° to 43° C (50.0° to 109.4° F). Maximum altitude: 2133 m (6998.0 ft)

•Humidity:

—Server on: 8% to 80%

—Server off: 8% to 80%

Heat output:

Approximate heat output in British thermal units (Btu) per hour

•Minimum configuration: 341 Btu (100 watts)

•Maximum configuration: 1604 Btu (470 watts)

Electrical input:

•Sine-wave input (50-60 Hz) required

•Input voltage low range:

—Minimum: 100 V ac

—Maximum: 127 V ac

•Input voltage high range:

—Minimum: 200 V ac

—Maximum: 240 V ac

•Input kilovolt-amperes (kVA), approximately:

—Minimum: 0.08 kVA

—Maximum: 0.52 kVA

Table 1. Features and specifications

*KB equals approximately 1000 bytes. MB equals approximately 1000000 bytes. GB equals approximately 1000000000 bytes.

2 IBM® xSeries 220 User’s Reference