IBM manual Diagnostic error message tables, IBM xSeries 220 User’s Reference

Diagnostic error message tables

The following tables provide descriptions of the error messages that might appear when you run the diagnostic programs.

Attention: If diagnostic error messages appear that are not listed in the following tables, make sure that your server has the latest levels of BIOS, ServeRAID, and diagnostics microcode installed.

Code	Function	Result	Text message	Action
001	Core system	Failed	Processor board, ECC Test	Call for service.
			System board
005	Video port		Processor and system boards
011	Serial port		Integrated serial port
014	Parallel port		Integrated parallel port
015	USB interface	Aborted	Can NOT test USB interface while it is in use.	1. Turn off the server.
			Note: If you have a USB keyboard or mouse	2. Replace the USB
			attached, you cannot run the diagnostic	keyboard and
			program for the USB interface.	mouse with a
				standard keyboard
				and mouse.
				3. Turn on the server.
				4. Run the diagnostic
				test again.
				5. If the test still
				aborts with no USB
				devices attached,
				follow Failed action
				below.
		Failed	System board	Call for service.
020	PCI interface	Failed	System board	Call for service.
030	SCSI interface	Failed	SCSI adapter in slot n failed register/counter/ power	Refer to the information
			test	provided with the
			(where n is the slot number of the failing adapter)	adapter for instructions.
				If the problem persists,
				call for service.
			SCSI controller on system board failed	Call for service.
			register/counter/power test

90 IBM® xSeries 220 User’s Reference