IBM 220 manual Code, Function, Result, Text message, Action

Code	Function	Result	Text message	Action
035	ServeRAID	Aborted	Test setup error: No ServeRAID adapter found on	Make sure that the
			system board or PCI bus	ServeRAID adapter is
				properly installed. If the
				problem remains,
				replace the ServeRAID
				adapter. If the problem
				persists, call for service.
		Failed	Adapter in slot n; adapter/drive configuration error	Run the ServeRAID
			(where n is the slot number of the failing adapter)	Configuration Utility.
				If the problem remains,
			Adapter in slot n; internal error
				replace the ServeRAID
			(where n is the slot number of the failing adapter)	adapter in slot n.
			Logical drive m on adapter in slot n
			(where m is the number of the failing logical drive	If the problem persists,
			and n is the slot number of the adapter)	call for service.
			On system board; internal error	Run the ServeRAID
				Configuration Utility.
			On system board; adapter/drive configuration error
				If the problem persists,
			Logical drive on system board adapter
				call for service.
			Adapter in slot n; memory allocation error	Call for service.
			(where n is the slot number of the failing adapter)
			On system board; memory allocation error
			On system board; PCI configuration error
			On system board; POST error
			Adapter in slot n; POST error	Replace the ServeRAID
			(where n is the slot number of the failing adapter)	adapter in slot n. If the
				problem persists, call for
				service.
			Adapter in slot n; PCI configuration error
			(where n is the slot number of the failing adapter)
			SCSI drive on adapter in slot n, SCSI ID m	Check the cable and
			(where n is the slot number of the adapter and m is	power connections on
				the drive. If the problem
			the SCSI ID of the drive)	persists, call for service.
075	Power supply	Failed	Voltage sensed by the system is out of range	Call for service.

Chapter 6. Solving problems 91